[Dsg-halla_magnets] PLC control of JT valve action

[Steven Lassiter]

Hello Pablo,

 When the PLC has control of the JT motors, the relays are being turned on/off when the codes sends the signal to open or close them.
The JTV1 is now opening and closing in key switch manual mode. It does not work in PLC mode.


Steven
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20220221/365fda5f/attachment.html>