[Dsg-dc] gas cRio
Brian Eng
beng at jlab.org
Tue Jul 24 11:29:08 EDT 2018
Found a bad ground wire for the pressure signal, Marc took the cable back to the EEL to repair it.
The pressures for the DC mixing have been increased: https://logbooks.jlab.org/entry/3581875
If it has trouble getting to 100 psi you might need to mess with the regulators.
----- Original Message -----
> From: "Morgan Cook" <mcookiv at jlab.org>
> To: "Brian Eng" <beng at jlab.org>, "Marc McMullen" <mcmullen at jlab.org>
> Cc: "dsg-dc" <dsg-dc at jlab.org>
> Sent: Tuesday, July 24, 2018 8:43:37 AM
> Subject: gas cRio
> Hi Brian and Marc,
>
> The #1 mixing tank signal flaked out when you made the changes. It's reading
> about 20psi high and is really noisy.
>
> I would also like to change the mixing settings to operate between 80-100 psi
> instead of 60-80 psi.
>
> Regards,
> Morgan
More information about the Dsg-dc
mailing list