[Dsg-ft] [New Logentry] MFC Flow Values

[beng at jlab.org]

Logentry Text:
--
For future reference here's what the minimum flow values are for the various gases for the MVT (and FT since they come from the same mixing system).

Ar = 41.7 sccm
C4H10 = 3.9 sccm
CF4 = 3.15 sccm

Any values entered or calculated below this value will result in no (or incorrect) flow from that particular MFC.

Also, the maximum flow values are the following:

Ar = 2780 sccm
C4H10 = 260 sccm
CF4 = 210 sccm

Similarly to the minimum values, any ones entered or calculated higher than the maximum will only set the MFC to the maximum flow, which will result in an incorrect gas mix being flown.

---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/3492865
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-ft/attachments/20171114/51eeb799/attachment.html>