[Dsg-htcc] MFC flow readings

[Brian Eng]

Also, Will removed the primary networking from the cRIO yesterday to test if it would flow without it, since it worked and EPICS wasn't working anyway it was left that way.

----- Original Message -----
> From: "Brian Eng" <beng at jlab.org>
> To: dsg-htcc at jlab.org
> Sent: Tuesday, January 17, 2017 5:57:31 PM
> Subject: [Dsg-htcc] MFC flow readings

> Nick/Youri,
> 
> Marc and I found that the error with the flow reading back is due to the fact
> that the EPICS PVs needs to be renamed and the code was still using the old
> name. It just so happened that Wesley switched over when you guys were also
> messing with the cables.
> 
> I was going to simply remove the writing to EPICS functionality (so you'd at
> least get the display to work on the local screen), unfortunately with the CC
> network maintenance going on I can't get a license from the LabVIEW server
> right now (or even check my email locally, thankfully Zimbra still works).
> 
> So as Nick discovered the flow setpoint control does still work, however the
> read back functionality for the MFC (and writing to EPICS) is broken until we
> get a chance to update the code tomorrow.
> 
> Thanks
> --
> Brian Eng
> Detector Support Group
> 757-269-6018
> _______________________________________________
> Dsg-htcc mailing list
> Dsg-htcc at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-htcc