[Dsg-hallb_magnets] Updating Torus Fast-Daq cRIO to 2016 software

[Ruben Fair]

Great - thank you 

Ruben 



From: "Tyler Lemon" <tlemon at jlab.org> 
To: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
Sent: Tuesday, December 13, 2016 1:19:05 PM 
Subject: Re: [Dsg-hallb_magnets] Updating Torus Fast-Daq cRIO to 2016 software 

Ruben and Renuka, 

I will start the upgrade now. I will also make a logbook post with the current status of the upgrade process. 

Best regards, 
Tyler 


From: "Ruben Fair" <rfair at jlab.org> 
To: "Tyler Lemon" <tlemon at jlab.org> 
Cc: "David Kashy" <kashy at jlab.org>, "Nicholas Sandoval" <sandoval at jlab.org>, "Probir Ghoshal" <ghoshal at jlab.org>, "Wesley Moore" <wmoore at jlab.org> 
Sent: Tuesday, December 13, 2016 1:13:39 PM 
Subject: Re: [Dsg-hallb_magnets] Updating Torus Fast-Daq cRIO to 2016 software 

Hi Tyler, 

Yes - certainly you can do that anytime this afternoon. 

Regards 

Ruben 



From: "Tyler Lemon" <tlemon at jlab.org> 
To: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
Sent: Tuesday, December 13, 2016 1:10:15 PM 
Subject: [Dsg-hallb_magnets] Updating Torus Fast-Daq cRIO to 2016 software 

Dear Ruben, 

Before adding shared variable monitoring to the Torus Fast-Daq cRIO (as was added to both Solenoid cRIOs last week), it would good to upgrade the Torus cRIO to the most recent firmware and base software. 

During the upgrade, the Fast-Daq cRIO will be restarted several times. The upgrade is expected to take about 2 hours to fully bring the cRIO back to normal operation, but it would be best to reserve more time in the event issues come up and the software needs to be reverted. 

Could this upgrade to the Torus Fast-Daq cRIO be started this afternoon? 

Best regards, 
Tyler 


_______________________________________________ 
Dsg-hallb_magnets mailing list 
Dsg-hallb_magnets at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets 


_______________________________________________ 
Dsg-hallb_magnets mailing list 
Dsg-hallb_magnets at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20161213/dbd97342/attachment.html>