[Dsg-hallb_magnets] Fwd: request to reboot Solenoid LV cRIO to Hall Sensor debugging

[Ruben Fair]

Great thank you guys

Ruben

> On Dec 21, 2016, at 5:05 PM, Tyler Lemon <tlemon at jlab.org> wrote:
> 
> 
> Renuka,
> 
> The Hall Sensor issue has been fixed and the Solenoid LV cRIO is now back in normal operation. Pablo has also confirmed he is seeing correct Hall Sensor data on the PLC.
> 
> Best regards,
> Tyler
> 
> From: "Renuka Rajput-Ghoshal" <renuka at jlab.org>
> To: "Scot Spiegel" <spiegel at jlab.org>, "Tyler Lemon" <tlemon at jlab.org>
> Cc: "Pablo Campero" <campero at jlab.org>, "Nicholas Sandoval" <sandoval at jlab.org>, "rfair" <rfair at jlab.org>, "Probir Ghoshal" <ghoshal at jlab.org>
> Sent: Wednesday, December 21, 2016 4:10:07 PM
> Subject: Re: [Dsg-hallb_magnets] request to reboot Solenoid LV cRIO to Hall        Sensor debugging
> 
> Thanks Scot,
> 
> Tyler, you can stop solenoid LV cRIO  for debugging.
> Please let me know when you complete the debugging.
> 
> Thanks
> Renuka
> 
> 
> ----- Original Message -----
> From: "Scot Spiegel" <spiegel at jlab.org>
> To: "Tyler Lemon" <tlemon at jlab.org>, "Pablo Campero" <campero at jlab.org>, "Nicholas Sandoval" <sandoval at jlab.org>
> Cc: "rfair" <rfair at jlab.org>, "Renuka Rajput-Ghoshal" <renuka at jlab.org>, "Probir Ghoshal" <ghoshal at jlab.org>
> Sent: Wednesday, December 21, 2016 3:28:14 PM
> Subject: Re: [Dsg-hallb_magnets] request to reboot Solenoid LV cRIO to Hall        Sensor debugging
> 
> Tyler, 
> 
> Please use the v22 version dated: Dec. 19, 2016 of this file to avoid confusion... 
> 
> Thanks, 
> 
> Scot Spiegel 
> Sr. Technologist / Designer 
> Physics / Hall D 
> JSA Jefferson Lab 
> 12000 Jefferson Ave. 
> Bldg. 55 Rm. 1546-24 
> Newport News, VA. 23606 
> Ph. 757-536-5900 
> Wk. 757-269-5900 
> 
> 
> From: "Tyler Lemon" <tlemon at jlab.org> 
> To: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
> Sent: Wednesday, December 21, 2016 3:07:47 PM 
> Subject: [Dsg-hallb_magnets] request to reboot Solenoid LV cRIO to Hall Sensor debugging 
> 
> Hello Renuka, 
> 
> This morning Pablo and I noticed that the Solenoid LV cRIO was incorrectly sending data for two Hall Sensors. According to the Master Instrumentation List, there should only be one Hall Sensor in LV Chassis 2 for the entire Solenoid system. 
> 
> Can the Solenoid LV cRIO be stopped for debugging? 
> 
> Attached is also the Master Instrumentation List that I am using. Can you confirm that this version is the most up-to-date? 
> 
> Please let me know. 
> 
> Best regards, 
> Tyler 
> 
> _______________________________________________ 
> Dsg-hallb_magnets mailing list 
> Dsg-hallb_magnets at jlab.org 
> https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets
> 
> _______________________________________________
> Dsg-hallb_magnets mailing list
> Dsg-hallb_magnets at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20161221/b562f318/attachment.html>