[Dsg-hallb_magnets] Fwd: request to reboot Solenoid LV cRIO to Hall Sensor debugging

[Tyler Lemon]

Renuka, 

The Hall Sensor issue has been fixed and the Solenoid LV cRIO is now back in normal operation. Pablo has also confirmed he is seeing correct Hall Sensor data on the PLC. 

Best regards, 
Tyler 


From: "Renuka Rajput-Ghoshal" <renuka at jlab.org> 
To: "Scot Spiegel" <spiegel at jlab.org>, "Tyler Lemon" <tlemon at jlab.org> 
Cc: "Pablo Campero" <campero at jlab.org>, "Nicholas Sandoval" <sandoval at jlab.org>, "rfair" <rfair at jlab.org>, "Probir Ghoshal" <ghoshal at jlab.org> 
Sent: Wednesday, December 21, 2016 4:10:07 PM 
Subject: Re: [Dsg-hallb_magnets] request to reboot Solenoid LV cRIO to Hall Sensor debugging 

Thanks Scot, 

Tyler, you can stop solenoid LV cRIO for debugging. 
Please let me know when you complete the debugging. 

Thanks 
Renuka 


----- Original Message ----- 
From: "Scot Spiegel" <spiegel at jlab.org> 
To: "Tyler Lemon" <tlemon at jlab.org>, "Pablo Campero" <campero at jlab.org>, "Nicholas Sandoval" <sandoval at jlab.org> 
Cc: "rfair" <rfair at jlab.org>, "Renuka Rajput-Ghoshal" <renuka at jlab.org>, "Probir Ghoshal" <ghoshal at jlab.org> 
Sent: Wednesday, December 21, 2016 3:28:14 PM 
Subject: Re: [Dsg-hallb_magnets] request to reboot Solenoid LV cRIO to Hall Sensor debugging 

Tyler, 

Please use the v22 version dated: Dec. 19, 2016 of this file to avoid confusion... 

Thanks, 

Scot Spiegel 
Sr. Technologist / Designer 
Physics / Hall D 
JSA Jefferson Lab 
12000 Jefferson Ave. 
Bldg. 55 Rm. 1546-24 
Newport News, VA. 23606 
Ph. 757-536-5900 
Wk. 757-269-5900 


From: "Tyler Lemon" <tlemon at jlab.org> 
To: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
Sent: Wednesday, December 21, 2016 3:07:47 PM 
Subject: [Dsg-hallb_magnets] request to reboot Solenoid LV cRIO to Hall Sensor debugging 

Hello Renuka, 

This morning Pablo and I noticed that the Solenoid LV cRIO was incorrectly sending data for two Hall Sensors. According to the Master Instrumentation List, there should only be one Hall Sensor in LV Chassis 2 for the entire Solenoid system. 

Can the Solenoid LV cRIO be stopped for debugging? 

Attached is also the Master Instrumentation List that I am using. Can you confirm that this version is the most up-to-date? 

Please let me know. 

Best regards, 
Tyler 

_______________________________________________ 
Dsg-hallb_magnets mailing list 
Dsg-hallb_magnets at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20161221/2968e733/attachment.html>