[Dsg-hallb_magnets] Hall B Solenoid - Additional TP for new relief valve

[Tyler Lemon]

Hello, 

Seeing that there are two serial numbers, are there going to be two new PT100s added for the relief valve? Or is one of the sensors a redundant backup? 

Is there an updated Master Instrumentation spreadsheet showing the new PT100s? 

Best regards, 
Tyler 




From: "Krister Bruhwel" <bruhwel at jlab.org> 
To: "Probir Ghoshal" <ghoshal at jlab.org> 
Cc: "Tyler Lemon" <tlemon at jlab.org>, "Krister Bruhwel" <bruhwel at jlab.org>, "Ruben Fair" <rfair at jlab.org>, "Ramakrishna Bachimanchi" <bachiman at jlab.org>, "Pablo Campero Rojas" <campero at jlab.org>, "Scot Spiegel" <spiegel at jlab.org>, "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
Sent: Tuesday, May 16, 2017 11:51:50 AM 
Subject: Re: Hall B Solenoid - Additional TP for new relief valve 

Hello, 
211 and 212 

Thanks, 
Krister 

On Tue, May 16, 2017 at 08:03:30AM -0400, Probir Ghoshal wrote: 
> Tyler, 
> 
> The calibration is exactly same as we have for all other Pt100 (aluminum block) used in the system. 
> 
> Krister- Could you please provide the Sr numbers for the Pt100 sensors. 
> 
> Regards 
> 
> Probir 
> ----- Original Message ----- 
> From: "Tyler Lemon" <tlemon at jlab.org> 
> To: "Ruben Fair" <rfair at jlab.org> 
> Cc: "Ramakrishna Bachimanchi" <bachiman at jlab.org>, "Probir Ghoshal" <ghoshal at jlab.org>, "Pablo Campero Rojas" <campero at jlab.org>, "Scot Spiegel" <spiegel at jlab.org>, "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
> Sent: Tuesday, May 16, 2017 7:43:39 AM 
> Subject: Re: Hall B Solenoid - Additional TP for new relief valve 
> 
> Ruben, 
> 
> What is the serial number for the new PT100? Also, is there a calibration curve for the sensor? 
> 
> Please let me know so I can update the LV cRIO program. 
> 
> Best regards, 
> Tyler 
> 
> 
> From: "Ruben Fair" <rfair at jlab.org> 
> To: "Ramakrishna Bachimanchi" <bachiman at jlab.org> 
> Cc: "Probir Ghoshal" <ghoshal at jlab.org>, "Pablo Campero Rojas" <campero at jlab.org>, "Tyler Lemon" <tlemon at jlab.org>, "Scot Spiegel" <spiegel at jlab.org> 
> Sent: Monday, May 15, 2017 2:20:58 PM 
> Subject: Fwd: Hall B Solenoid - Additional TP for new relief valve 
> 
> Hi Rama, 
> 
> Please see note below. 
> 
> We have to install an additional PT102. 
> 
> Can you provide a channel? 
> 
> Regards 
> 
> Ruben 
> 
> 
> From: "Scot Spiegel" <spiegel at jlab.org> 
> To: "Ruben Fair" <rfair at jlab.org>, "Pablo Campero Rojas" <campero at jlab.org>, "bachiman" <bachiman at jlab.org> 
> Cc: "Probir Ghoshal" <ghoshal at jlab.org>, "Renuka Rajput-Ghoshal" <renuka at jlab.org>, "Krister Bruhwel" <bruhwel at jlab.org>, "Nicholas Sandoval" <sandoval at jlab.org> 
> Sent: Monday, May 15, 2017 2:18:37 PM 
> Subject: Re: Hall B Solenoid - Additional TP for new relief valve 
> 
> Gents, 
> 
> You cannot use any of the CRYOCON channels... as they are paired i.e. A-B, C-D etc. and already grouped together and not available for a single input. 
> 
> I talked with Probir and he said any LV Chassis channel will suffice. Rama just needs to I.D. an appropriate channel to use and it can be plugged in directly. 
> 
> This is the quickest and least disruptive to the already checked systems. I have already given Krister the 100' labeled (TP8680) cable. He needs the Mounting and PT-102's 
> 
> Feedback welcomed. 
> 
> Best regards, 
> 
> Scot Spiegel 
> Sr. Technologist / Designer 
> Physics / Hall D 
> JSA Jefferson Lab 
> 12000 Jefferson Ave. 
> Bldg. 55 Rm. 1546-24 
> Newport News, VA. 23606 
> Ph. 757-536-5900 
> Wk. 757-269-5900 
> 
> 
> From: "Ruben Fair" <rfair at jlab.org> 
> To: "Tyler Lemon" <tlemon at jlab.org> 
> Cc: "Joseph Matalevich" <josephm at jlab.org>, "Renuka Rajput-Ghoshal" <renuka at jlab.org>, "Krister Bruhwel" <bruhwel at jlab.org>, "Scot Spiegel" <spiegel at jlab.org>, "Pablo Campero" <campero at jlab.org>, "Wesley Moore" <wmoore at jlab.org> 
> Sent: Monday, May 15, 2017 2:05:37 PM 
> Subject: Re: Hall B Solenoid - Additional TP for new relief valve 
> 
> Tyler, Pablo. 
> 
> I suggest we use Cryocon unit 1, channel F for the new TP8680. 
> 
> Please work with Wesley to get the relevant EPICS screen updated once we have the updated P and ID from Joe. 
> 
> Ruben 
> 
> 
> 
> From: "Tyler Lemon" <tlemon at jlab.org> 
> To: "Ruben Fair" <rfair at jlab.org>, "Joseph Matalevich" <josephm at jlab.org>, "Renuka Rajput-Ghoshal" <renuka at jlab.org>, "Krister Bruhwel" <bruhwel at jlab.org>, "Scot Spiegel" <spiegel at jlab.org>, "Pablo Campero Rojas" <campero at jlab.org>, "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
> Sent: Monday, May 15, 2017 11:29:26 AM 
> Subject: Re: Hall B Solenoid - Additional TP for new relief valve 

-- 
―――――――――――――――――――――――――――――――――――――――――――――――――― 
Krister Bruhwel : Jefferson Lab : (757) 269-7868 
―――――――――――――――――――――――――――――――――――――――――――――――――― 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20170517/5e8bbb94/attachment.html>