[Dsg-hallb_magnets] Torus Cernox jumped to 325 K and recovered

[Tyler Lemon]

Hello, 

This morning, I noted that a Cernox had jumped to 325 K and automatically recovered. All Cernoxes are reading a normal temperature value now. 

>From the LabVIEW latching indicators, the Cernox TR817D3HB1 in LV Chassis 3 was the sensor that jumped to 325 K. However, I cannot find in MyaViewer where that Cernox or any Cernox read 325 K recently. 

Since there is only Brian's subVI that targets a fixed voltage for Cernox excitations, it seems that just using a fixed target voltage allows a Cernox to automatically recover if it jumps to 325 K. 

Despite the fixed voltage allowing the Cernox to recover, it might be a good idea to continue monitoring the Cernoxes to observe another instance of a Cernox automatically recovering that is recorded in MyaViewer before closing the 325 K error investigation. 

Best regards, 
Tyler 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20170531/a96ee321/attachment.html>