[Dsg-hallb_magnets] Check Load cell in cRIO

[Brian Eng]

The Solenoid cRIO now has a startup executable deployed, Pablo and I verified that it runs properly when power cycled and updates the PLC.

Prior to deploying it we got the values from a debug version of the code that can display the raw values for the individual chassis, attached is a screenshot from chassis 1, namely why the LC is returning 0 lbs (because the voltage is negative).

----- Original Message -----
> From: "Brian Eng" <beng at jlab.org>
> To: "Nick Sandoval" <sandoval at jlab.org>
> Cc: "Pablo Campero Rojas" <campero at jlab.org>, "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
> Sent: Friday, November 10, 2017 12:48:13 PM
> Subject: Re: [Dsg-hallb_magnets] Check Load cell in cRIO

> Yeah, the solenoid LV cRIO wasn't using a startup executable as it was being run
> manually from when we were testing/debugging.
> 
> Pablo and I will be in the hall this afternoon with detector I&C work and we'll
> take a look at it as well as deploying the startup application to the cRIO and
> rebooting it to make sure it comes back online without any issue (unless anyone
> has any objections with that?).
> 
>> On Nov 10, 2017, at 10:05 AM, Nick Sandoval <sandoval at jlab.org> wrote:
>> 
>> The cable swap was was just a test, it has been moved back. Pablo reported that
>> one of the VI's was not an executable so I just wanted it checked.  It has not
>> been reading since mid October so not likely.  Really to look at the VI and see
> > what that channel is reporting.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: solenoid - LV chassis 1 values.PNG
Type: image/png
Size: 137166 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20171110/6abfe0d6/attachment-0001.png>