[Dsg-hallb_magnets] [New Logentry] Follow-up Re: CERNOX Temperature Sensors not reading (LV Chassis #4)

[beng at jlab.org]

Logentry Text:
--
Same as with the solenoid earlier, the Q0131 board blew the +12V fuse taking out all the Cernox sensors on this chassis.

The fuse in turn blew because the C34 capacitor failed; this is a filter cap between +12V & GND and it failed by causing a hard short between the two.

This PCB has been replaced with a spare and all Cernox sensors are back online. Armen from Fast Electronics has already removed the failed capacitor so we can do studies with a board minus the filtering in the future.

---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/3487421
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20171006/97f7f2e0/attachment.html>