[Dsg-hallb_magnets] qdi thresh

[Brian Eng]

The QD threshold uses the difference between lower and upper, so that would (or should) have been cancelled out by the lower.

----- Original Message -----
> From: "Amrit Yegneswaran" <yeg at jlab.org>
> To: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
> Sent: Friday, September 15, 2017 3:53:45 PM
> Subject: [Dsg-hallb_magnets] qdi thresh

> brian,
> if these be baseline shifts you need to go to 1.69/2+0.500 V ~1.3 V on both PLC
> and hardwired.
>