[Dsg-hallb_magnets] Torus PLC -going online

[Nick Sandoval]

Brian,
The latest .ACD file for all (3)PLC's has been posted to GIT.  Ill send the error to rockwell and see if they have anything to say...

Pablo,
When you get a chance please try again with the latest .ACD file, report back if you have any problems.

Thanks,

Nick

----- Original Message -----
From: "Nicholas Sandoval" <sandoval at jlab.org>
To: "Brian Eng" <beng at jlab.org>
Cc: "Pablo Campero Rojas" <campero at jlab.org>, "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
Sent: Monday, December 10, 2018 1:10:19 PM
Subject: Re: Torus PLC -going online

----- Original Message -----
From: "Brian Eng" <beng at jlab.org>
To: "Nicholas Sandoval" <sandoval at jlab.org>, "Pablo Campero Rojas" <campero at jlab.org>
Cc: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
Sent: Monday, December 10, 2018 12:15:13 PM
Subject: Re: Torus PLC -going online

The latest version on GitHub is from Oct 5 so not that far off from what you have.


If you're going to download should probably update it there too.

________________________________
From: Dsg-hallb_magnets <dsg-hallb_magnets-bounces at jlab.org> on behalf of Nick Sandoval <sandoval at jlab.org>
Sent: Monday, December 10, 2018 12:07:27 PM
To: Pablo Campero Rojas
Cc: dsg-hallb magnets
Subject: Re: [Dsg-hallb_magnets] Torus PLC -going online

Thanks Pablo,
The latest version .ACD I had was from 10/24/18.

I will perform a download shortly, I have already warned Denny this may be necessary and he will monitor cryo.
Hopefully this will fix the issue, once complete ill post the latest .ACD in a log entry.

Best REgards,

Nick

----- Original Message -----
From: "Pablo Campero Rojas" <campero at jlab.org>
To: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
Sent: Monday, December 10, 2018 12:00:06 PM
Subject: Re: [Dsg-hallb_magnets] Torus PLC -going online

Hi Nick,

I just tried to go online with the Torus PLC and I had the same error message showed in your previous email.
I used an ACD file from 8/27/2018, which was the last one that I used when I went online with the Torus PLC.
Usually DSG uses "dsgcontrols1' or "DSGTest1" PCs to connect online with the Solenoid and Torus PLCs, these PCs have different version of RSLOGIX5000/Studio5000 installed (v13 - v27). We did not have this type of error before.

Regards,
Pablo



From: Nick Sandoval <sandoval at jlab.org>
Sent: Monday, December 10, 2018 11:23 AM
To: Pablo Campero Rojas
Subject: Torus PLC -going online

Hi Pablo,

I got a strange message trying to go online with Torus PLC last night.

Can you try going online for me from a computer other than clas12magnetpc ? Do you know if any of the DSG computers that may have uploaded from have different versions of software than what was on the Hall B Computers? Looking through RS databases that seems to be one possible culprit.

If you get same error one solution I have found so far is to download the project which would screw up some of our filtering averaging timing, but right now would be perfect time to perform since we have (2) days.

IF you do go online please send me that .ACD file for me to try.

THanks,

Nick

_______________________________________________
Dsg-hallb_magnets mailing list
Dsg-hallb_magnets at jlab.org
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets
_______________________________________________
Dsg-hallb_magnets mailing list
Dsg-hallb_magnets at jlab.org
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets