[Dsg-hallb_magnets] Magnet cRIOs Console Output to Terminal Server

[Tyler Lemon]

Hi Brian, 

This afternoon, Mindy and I ran four, purple network cables from each of the Magnet cRIOs to the MOXA terminal server on SF Level 1. Each cable has both ends terminated with RJ45 connectors. 

We left the cables ends disconnected and hanging by each cRIO and at the terminal server. We didn't label the network cables, but we can use an Ethernet tester to determine which cables go to which cRIO. 

Three of the cRIOs (Torus FastDAQ, Solenoid FastDAQ, and Solenoid LV) will need adapters to go from the RJ45 connector to a d-sub connector. Do we have these adapters on hand? 

Best regards, 
Tyler 


From: "Brian Eng" <beng at jlab.org> 
To: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
Sent: Tuesday, March 20, 2018 10:43:52 AM 
Subject: [Dsg-hallb_magnets] Magnet cRIOs Console Output to Terminal Server 

These notes are mostly for myself so I don't forget as well as for Mindy when she does the cables. 

Uses purple network cable, RJ45 on both ends and uses T568B pinout 
Pinout = RS232 table from here: https://clasweb.jlab.org/wiki/index.php/MOXA_NPort_5600_Pinouts 

Moxa NPort 5650 
top of L1-10 (ports on north side) 
ports 13, 14, 15, 16 

hallb-crio-sol-fast 
PORT 1 / RS232 
top of L2-9 (facing south) 
moxa port 13 

hallb-crio-sol-lv 
serial port icon 
middle of L2-6 (facing north) 
moxa port 14 

hallb-crio-tor-fast 
PORT 1/ RS232 
middle of L2-4 (facing north) 
moxa port 15 

hallb-crio-tor-lv 
RS-232 (need NI cable adapter) 
top of L2-4 (facing north) 
moxa port 16 


Serial port settings 
115.2 kbps 8N1 no flow control 
_______________________________________________ 
Dsg-hallb_magnets mailing list 
Dsg-hallb_magnets at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20180320/941b3edc/attachment.html>