[Dsg-hallb_magnets] Magnet cRIOs Console Output to Terminal Server

[Brian Eng]

Tyler,

Nathan should have the RJ45 to DB9 adapters. Should be able to get them tomorrow.

The solenoid LV cRIO uses an RJ50 connector, so we'll need to order a cable assembly which turns that into a DB9. I already submitted a PR for one, but I have one I've been using for testing that can be used in the meantime.

> On Mar 20, 2018, at 4:41 PM, Tyler Lemon <tlemon at jlab.org> wrote:
> 
> Hi Brian,
> 
> This afternoon, Mindy and I ran four, purple network cables from each of the Magnet cRIOs to the MOXA terminal server on SF Level 1. Each cable has both ends terminated with RJ45 connectors.
> 
> We left the cables ends disconnected and hanging by each cRIO and at the terminal server. We didn't label the network cables, but we can use an Ethernet tester to determine which cables go to which cRIO.
> 
> Three of the cRIOs (Torus FastDAQ, Solenoid FastDAQ, and Solenoid LV) will need adapters to go from the RJ45 connector to a d-sub connector. Do we have these adapters on hand?
> 
> Best regards,
> Tyler