[Dsg-hallb_magnets] Torus interlock checkout complete

[Probir Ghoshal]

Hi Tyler,

Yes was measured.
Solenoid- 6.58V and Torus was 10.7 V (on Thursday) at Point TP4.
Thanks again for completing all.
I will wait for your scanned copies..
Regards
Probir
________________________________
From: Dsg-hallb_magnets <dsg-hallb_magnets-bounces at jlab.org> on behalf of Tyler Lemon <tlemon at jlab.org>
Sent: Monday, June 7, 2021 2:26 PM
To: dsg-hallb magnets <dsg-hallb_magnets at jlab.org>
Subject: [Dsg-hallb_magnets] Torus interlock checkout complete

Hi Probir,

Aaron and I have completed the Torus pre-power up interlock checkout.

Like the Solenoid, we were unable to check one of the cryogenic liquid level interlocks because that sensor never dropped below 100%.

Also, we need to measure the voltage inside the Torus power supply. Was the voltage measured inside the Solenoid MPS before power was removed from it?

We'll scan in a copy of both the Solenoid and Torus checklists once we have that voltage or we get word that it's fine to upload the checklist without the measurement.

-Tyler


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20210607/c75e87f2/attachment-0001.html>