[Dsg-mvt] Electricity for heating blanket and heat tape

[Matthew Marchlik]

What temperature did 10% produce?
Matt

----- Original Message -----
From: "George Jacobs" <jacobsg at jlab.org>
To: "mdefurne" <mdefurne at jlab.org>, "Matthew Marchlik" <marchlik at jlab.org>, "Todd Ewing" <jtewing at jlab.org>
Cc: DSG-mvt at jlab.org
Sent: Friday, December 1, 2017 4:05:34 PM
Subject: Re: Electricity for heating blanket and heat tape

I increased the setting on the heat tape controllers to ~11%. I also 
changed the admin tags to <15% .  I will check it again at 5:00pm.

George


On 12/01/2017 02:46 PM, mdefurne wrote:
>
> Thank you George,
>
> Right after the Run Coordinator meeting, I ll try to flush with Argon 
> all detectors. We will see how things behave overnight.
>
> Maxime.
>
>
> Le 01/12/2017 à 14:32, George Jacobs a écrit :
>> I have turned the heat tape on and set to all 3 controllers to 10% as 
>> an initial test. I also increased argon pressure to 35psi.
>>
>> George
>>
>> On 12/1/2017 11:40 AM, Matthew Marchlik wrote:
>>> Hi Maxime,
>>>
>>> If the MFCs are functional you may flow argon. The system is operational from a pressure systems standpoint.
>>>
>>> George,
>>>
>>> I saw the argon regulated to ~15 psig this morning. What do you recommend for MFCs inlet pressure for operation, 35 psig?
>>>
>>> Matt
>>>
>>> ----- Original Message -----
>>> From: "mdefurne"<mdefurne at jlab.org>
>>> To: "George Jacobs"<jacobsg at jlab.org>
>>> Cc: "Jason Willoughby"<jasonw at jlab.org>, "Matthew Marchlik"<marchlik at jlab.org>,dsg-mvt at jlab.org
>>> Sent: Friday, December 1, 2017 11:19:48 AM
>>> Subject: Electricity for heating blanket and heat tape
>>>
>>> Dear George, Dear Matt,
>>>
>>> I went this morning with Jason to take a look at what needs to be done
>>> for having electricity for the heating blanket and the heat tape. Jason
>>> will certainly go back there this afternoon with an electrician around
>>> 3pm. George, can you please go with them?
>>>
>>> Once the electricity is installed for the blanket, I will start testing
>>> and using the mixing system. Is it OK? (I would like to already use pure
>>> Argon, can I?)
>>>
>>> Kind regards,
>>>
>>> Maxime
>>
>> -- 
>> George Jacobs
>> Jefferson Lab (TJNAF)
>> STE 12
>> 12000 Jefferson Ave.
>> Newport News, VA 23606
>>
>> (office) 757-269-7115
>>
>> (cell)   757-876-0480
>>
>> (email)jacobsg at jlab.org
>>
>> (website)https://userweb.jlab.org/~jacobsg
>

-- 
George Jacobs
Physics Detector Support Group
Jefferson Lab (TJNAF)
STE 12
12000 Jefferson Ave.
Newport News, VA 23606

(office) 757-269-7115

(cell)   757-876-0480

(email) jacobsg at jlab.org

(website) https://userweb.jlab.org/~jacobsg