[Dsg-mvt] Fwd: Re: MVT Testing in EEL 125

[Marc McMullen]

Great! 

Marc McMullen 
Physics Division 
Detector Support Group 
7738 


From: "Walt Akers" <akers at jlab.org> 
To: "Marc McMullen" <mcmullen at jlab.org> 
Cc: "Amrit Yegneswaran" <yeg at jlab.org>, "Matt Marchlik" <marchlik at jlab.org>, "burkert" <burkert at jlab.org>, dsg-mvt at jlab.org, dsg-ft at jlab.org, "rossi patrizia" <rossi at jlab.org>, "Mac Mestayer" <mestayer at jlab.org> 
Sent: Wednesday, May 17, 2017 7:48:49 AM 
Subject: Re: [Dsg-mvt] Fwd: Re: MVT Testing in EEL 125 

Yes. 
Marc McMullen wrote: 
> Hi Walt, 
> 
> Does 10am in room 125 work for you? 
> 
> Marc 
> 
> Marc McMullen 
> Physics Division 
> Detector Support Group 
> 7738 
> 
> ------------------------------------------------------------------------ 
> *From: *"Walt Akers" <akers at jlab.org> 
> *To: *"Amrit Yegneswaran" <yeg at jlab.org>, "Marc McMullen" 
> <mcmullen at jlab.org>, "Matt Marchlik" <marchlik at jlab.org>, "burkert" 
> <burkert at jlab.org>, dsg-mvt at jlab.org, dsg-ft at jlab.org 
> *Cc: *"rossi patrizia" <rossi at jlab.org>, "Mac Mestayer" 
> <mestayer at jlab.org> 
> *Sent: *Tuesday, May 16, 2017 7:56:50 PM 
> *Subject: *Re: [Dsg-mvt] Fwd: Re: MVT Testing in EEL 125 
> 
> Hey Amrit: 
> 
> I've looked at the proposed space use and it looks like we can 
> accommodate it with a minimum of fuss. The compressor will 
> remain where it is... but, we may shift the bertha and power 
> supply a little further into the room. This shouldn't be a problem 
> because we had planned to move the bertha anyway, in order 
> to get it closer to the power receptacle. 
> 
> I spoke with Patrizia briefly, but she was moving quickly to prepare 
> for a trip. If you have a few minutes tomorrow, let's get together 
> and take a look. Changes like these are not uncommon, and we 
> should be able to resolve it without serious impacts. 
> 
> Walt 
> 
> Amrit Yegneswaran wrote: 
> > well this is news. 
> > anyway, be whatever it may, i've several choice phrases but refrain 
> > from using them... 
> > / 
> > / 
> > /I do hope/ the RICH compressor, air panel, and Bertha will not be 
> > moved. The locations of these and the layout of the RICH in the clean 
> > room have been approved by Walt and Marco. Further, a gas line for the 
> > RICH has been run, inside the clean room. 
> > 
> > /if relocating the compressor, air panel, and Bertha, or any one of 
> > these, is necessary contact Marco Mirizita and Patrizia Rossi./ 
> > 
> > 
> > 
> > ------------------------------------------------------------------------ 
> > *From: *"Marc Mcmullen" <mcmullen at jlab.org> 
> > *To: *"Maxime Defurne" <mdefurne at jlab.org>, rmiller at jlab.org, 
> > "burkert" <burkert at jlab.org>, marchlik at jlab.org, dsg-mvt at jlab.org 
> > *Sent: *Tuesday, May 16, 2017 4:10:09 PM 
> > *Subject: *Re: [Dsg-mvt] Fwd: Re: MVT Testing in EEL 125 
> > 
> > Hi Matt, 
> > 
> > Maxime has stated that the MVT will need gas in EEL 125, will the 
> > current pressure systems analysis for 124 cover this as well, or does 
> > something need to be done on your end? 
> > 
> > 
> > Thanks, 
> > 
> > Marc 
> > 
> > 
> > 
> > On 5/16/2017 3:54 PM, mdefurne wrote: 
> > > Hi Marc, 
> > > 
> > > We will indeed need gas supply in the room 125. First we will need 
> pure 
> > > argon to run leak test ,ideally, as soon as we get the micromegas 
> out of 
> > > the box. Then, while we add the tiles, we will need to make sure they 
> > > are well connected by taking quick cosmic runs so we will need premix 
> > > gas in the eel. Indeed You want to find out if there is a problem 
> with a 
> > > tile before adding the layer on top of it. 
> > > 
> > > Once everything will be assembled and work well, we will move to clean 
> > > room for SVT integration and take cosmics. 
> > > 
> > > Best, 
> > > 
> > > Maxime 
> > > 
> > > 
> > > Le 16/05/2017 à 15:14, Marc McMullen a écrit : 
> > >> Hi Maxime, 
> > >> 
> > >> I just left the Hall B Engineering meeting a while ago and it was 
> > >> mentioned that the MVT will go through some testing in room 125, 
> which 
> > >> is next door to the clean room. Do you know what type of testing will 
> > >> be done before it goes into the clean room for SVT/MVT 
> integration and 
> > >> will you need a gas supply to do the testing? 
> > >> 
> > >> Thanks, 
> > >> 
> > > 
> > 
> > -- 
> > Marc McMullen 
> > Detector Support Group 
> > 757-269-7738 
> > 
> > _______________________________________________ 
> > Dsg-mvt mailing list 
> > Dsg-mvt at jlab.org 
> > https://mailman.jlab.org/mailman/listinfo/dsg-mvt 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_mvt/attachments/20170517/22607659/attachment-0002.html>