[Dsg-mvt] Fwd: Re: MVT Testing in EEL 125

[Marc McMullen]

Hi Walt,

We can meet earlier, 9:30 or 9:45.

Marc


On 5/17/2017 7:48 AM, Walt Akers / JLAB wrote:
> Yes.
> Marc McMullen wrote:
>> Hi Walt,
>>
>> Does 10am in room 125 work for you?
>>
>> Marc
>>
>> Marc McMullen
>> Physics Division
>> Detector Support Group
>> 7738
>>
>> ------------------------------------------------------------------------
>> *From: *"Walt Akers" <akers at jlab.org>
>> *To: *"Amrit Yegneswaran" <yeg at jlab.org>, "Marc McMullen" 
>> <mcmullen at jlab.org>, "Matt Marchlik" <marchlik at jlab.org>, "burkert" 
>> <burkert at jlab.org>, dsg-mvt at jlab.org, dsg-ft at jlab.org
>> *Cc: *"rossi patrizia" <rossi at jlab.org>, "Mac Mestayer" 
>> <mestayer at jlab.org>
>> *Sent: *Tuesday, May 16, 2017 7:56:50 PM
>> *Subject: *Re: [Dsg-mvt] Fwd: Re: MVT Testing in EEL 125
>>
>> Hey Amrit:
>>
>> I've looked at the proposed space use and it looks like we can
>> accommodate it with a minimum of fuss.  The compressor will
>> remain where it is... but, we may shift the bertha and power
>> supply a little further into the room.  This shouldn't be a problem
>> because we had planned to move the bertha anyway, in order
>> to get it closer to the power receptacle.
>>
>> I spoke with Patrizia briefly, but she was moving quickly to prepare
>> for a trip.  If you have a few minutes tomorrow, let's get together
>> and take a look. Changes like these are not uncommon, and we
>> should be able to resolve it without serious impacts.
>>
>> Walt
>>
>> Amrit Yegneswaran wrote:
>> > well this is news.
>> > anyway, be whatever it may, i've several choice phrases but refrain
>> > from using them...
>> > /
>> > /
>> > /I do hope/ the RICH compressor, air panel, and Bertha will not be
>> > moved. The locations of these and the layout of the RICH in the clean
>> > room have been approved by Walt and Marco. Further, a gas line for the
>> > RICH has been run, inside the clean room.
>> >
>> > /if relocating the compressor, air panel, and Bertha, or any one of
>> > these, is necessary contact Marco Mirizita and Patrizia Rossi./
>> >
>> >
>> >
>> > 
>> ------------------------------------------------------------------------
>> > *From: *"Marc Mcmullen" <mcmullen at jlab.org>
>> > *To: *"Maxime Defurne" <mdefurne at jlab.org>, rmiller at jlab.org,
>> > "burkert" <burkert at jlab.org>, marchlik at jlab.org, dsg-mvt at jlab.org
>> > *Sent: *Tuesday, May 16, 2017 4:10:09 PM
>> > *Subject: *Re: [Dsg-mvt] Fwd: Re:  MVT Testing in EEL 125
>> >
>> > Hi Matt,
>> >
>> > Maxime has stated that the MVT will need gas in EEL 125, will the
>> > current pressure systems analysis for 124 cover this as well, or does
>> > something need to be done on your end?
>> >
>> >
>> > Thanks,
>> >
>> > Marc
>> >
>> >
>> >
>> > On 5/16/2017 3:54 PM, mdefurne wrote:
>> > > Hi Marc,
>> > >
>> > > We will indeed need gas supply in the room 125. First we will 
>> need pure
>> > > argon to run leak test ,ideally, as soon as we get the micromegas 
>> out of
>> > > the box. Then, while we add the tiles, we will need to make sure 
>> they
>> > > are well connected by taking quick cosmic runs so we will need 
>> premix
>> > > gas in the eel. Indeed You want to find out if there is a problem 
>> with a
>> > > tile before adding the layer on top of it.
>> > >
>> > > Once everything will be assembled and work well, we will move to 
>> clean
>> > > room for SVT integration and take cosmics.
>> > >
>> > > Best,
>> > >
>> > > Maxime
>> > >
>> > >
>> > > Le 16/05/2017 à 15:14, Marc McMullen a écrit :
>> > >> Hi Maxime,
>> > >>
>> > >> I just left the Hall B Engineering meeting a while ago and it was
>> > >> mentioned that the MVT will go through some testing in room 125, 
>> which
>> > >> is next door to the clean room. Do you know what type of testing 
>> will
>> > >> be done before it goes into the clean room for SVT/MVT 
>> integration and
>> > >> will you need a gas supply to do the testing?
>> > >>
>> > >> Thanks,
>> > >>
>> > >
>> >
>> > --
>> > Marc McMullen
>> > Detector Support Group
>> > 757-269-7738
>> >
>> > _______________________________________________
>> > Dsg-mvt mailing list
>> > Dsg-mvt at jlab.org
>> > https://mailman.jlab.org/mailman/listinfo/dsg-mvt
>

-- 
Marc McMullen
Detector Support Group
757-269-7738