[Dsg-rich] Egress path during RICH assembly in EEL 124

[Tyler Lemon]

Thanks, Walt. 

George and Marc, 
Please see Walt's email below regarding RICH assembly and the exit walkway. 

Best regards, 
Tyler 





From: "Walt Akers / JLAB" <akers at jlab.org> 
To: "Tyler Lemon" <tlemon at jlab.org>, "dsg-rich" <dsg-rich at jlab.org> 
Sent: Thursday, October 27, 2016 10:11:43 AM 
Subject: Re: Egress path during RICH assembly in EEL 124 
Tyler: 

The potential safety issues in a dynamic installation are 
endless - particularly as changes are being made. As I 
am currently managing several dozen installation areas, 
I tend to focus on the larger constraints and must leave it 
to the working groups and area safety wardens to identify 
and assess these issues. 

That said, I would encourage the person who raised this 
question to look at the diagrams themselves and assess if 
they think there is a problem that needs to be addressed. 
If there is, I will integrate the recommended changes into 
future plans. 

Walt 



Tyler Lemon wrote: 
> Dear Walt, 
> 
> In the DSG weekly meeting, we discussed the layout of the big clean 
> room during RICH assembly. The point was bought up that since there is 
> only one exit door (the door through the gowning area), there needs to 
> be a 36 inch wide, unobstructed walkway to this door from any part of 
> the clean room. Have the layout diagrams taken this into account for 
> the RICH assembly area? 
> 
> Best regards, 
> Tyler 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20161027/bcd17158/attachment-0002.html>