[Dsg-rich] R: R: Help

Fri Apr 7 10:15:33 EDT 2017

HelloTyler,
These aluminum frames will be used only for the mounting operations of the Entrance Panels. 
Regarding the exit panel, the mounting steps will be completely different and they will be defined by Kevin Bailey.
Best regards
Dario

Sent from Mail for Windows 10

From: Tyler Lemon
Sent: Friday, April 7, 2017 3:48 PM
To: dario orecchini; dsg-rich
Subject: Re: [Dsg-rich] R: R: Help

Hello Dario,

Just for our reference, what would these aluminum framing components be used for? You mentioned that they would be for the "Frontal Panels" assembly on the RICH case. Is this the same as the Exit Window to be installed? 

Thank you in advance for your clarifications.

Best regards,
Tyler

From: "Marc McMullen" <mcmullen at jlab.org>
To: "dario orecchini" <dario.orecchini at gmail.com>, "dsg-rich" <dsg-rich at jlab.org>
Sent: Thursday, April 6, 2017 11:18:03 AM
Subject: Re: [Dsg-rich] R:  R: Help

Hi Dario,
I don't see any issue with ordering the Bosch parts (metric) and having them sent here (unless they are expensive). If you want english standard 8020.net has a 3" x 3" profile would that work in place of the 90mm profile? You can specify the length on the website.
https://8020.net/3030.html
They also have a 1.5 x 1.5" profile which may replace the Bosch 30 x 30mm.
https://8020.net/1515.html
I have not found the equivalent of the gussets (corner hardware) yet, but they definitely have something.

Marc
On 4/6/2017 10:28 AM, dario.orecchini at gmail.com wrote:
The proposed family of Bosch components are right.

We are just trying to use english standard size because we were conviced that in USA it was more difficult found metric components.
Better this way.

As soon as the final design and the list of components will be completed, I'll send them to you.
Meanwhile i ask to Marco about “money aspects”.

Really thanks
    Dario

Inviato da Posta per Windows 10

Da: Marc McMullen
Inviato: giovedì 6 aprile 2017 16:13
A: dario.orecchini at gmail.com; dsg-rich
Oggetto: Re: [Dsg-rich] R: Help

Hi Dario,
Just to make sure of what you are looking for, I looked up the first part number:
http://www13.boschrexroth-us.com/Framing_Shop/Product/View_Product.aspx?category=10108&subcategory=1

Also, are you trying to get them in english standard sizes? May I ask why?

Thanks,
Marc

On 4/6/2017 10:05 AM, Marc McMullen wrote:
Thanks
On 4/6/2017 9:36 AM, dario.orecchini at gmail.com wrote:
Here a preliminary list of Bosch components:

1. Square Profile 90x90mm – 3842992422
2. Angular Bracket 90x90mm – 3842523575
3. Square Profile 30x30mm – 3842990723
4. Angular Bracket 30x30 – 3842523525
5. Multi-angle Bracket 30x30mm – 3842538683
6. Some other minor components are still under development.

It’s also important  to verify if the supplier can provide the profiles cutted “to size or” (I’m not sure if this is the correct term …)

Thanks in advance 
Dario
Inviato da Posta per Windows 10

Da: Marc McMullen
Inviato: giovedì 6 aprile 2017 14:46
A: dario orecchini; dsg-rich
Oggetto: Re: Help

Hi Dario,

Do you have a list of the components?

Thanks,

Marc McMullen
Physics Division
Detector Support Group
7738

From: "dario orecchini" <dario.orecchini at gmail.com>
To: "Marc McMullen" <mcmullen at jlab.org>
Sent: Thursday, April 6, 2017 5:39:01 AM
Subject: Help

Inviato da Posta per Windows 10
Hello Marc,

I need again your help.
We are working about the tools necessary for the “Frontal Panels” assembly on the RICH Case.
These tools would be made by aluminum profiles Bosch, whom be buyed in US and assembled in JLab to avoid the shipment cost.

We tried to choose the profiles and the related connection components in Imperial standard on the american Bosch website,
but I found only metric components.

Please, I ask you to check if (as it seems) it’s possible to buy these metric components in USA withouth problems.

Regards
Dario

-- 
Marc McMullen
Detector Support Group
757-269-7738

_______________________________________________
Dsg-rich mailing list
Dsg-rich at jlab.org
https://mailman.jlab.org/mailman/listinfo/dsg-rich

-- 
Marc McMullen
Detector Support Group
757-269-7738

-- 
Marc McMullen
Detector Support Group
757-269-7738

_______________________________________________
Dsg-rich mailing list
Dsg-rich at jlab.org
https://mailman.jlab.org/mailman/listinfo/dsg-rich

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170407/645d5bbe/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 73AAD5FDE9A847FBA40D0F55482D17BE.png
Type: image/png
Size: 148 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170407/645d5bbe/attachment-0002.png>