[Dsg-rich] Fwd: Re: lifting tool for RICH

[Marc McMullen]

Hi Marco

This sounds like a good plan to go with G&R, they have a good 
understanding of what you want to do, and they are on the approved 
fabricator/welder list from Jlab. Please forward the drawing changes to 
us as soon as you can, both Bob Miller and Facilities should review them 
so that we will not run into any unexpected questions during safety 
approvals.


Thanks,

Marc


On 4/11/2017 11:18 AM, Marco Mirazita wrote:
> Hi Marc,
> with today's last quotation, I received 5. The one from G&R was about 
> 5k$, the other four were from 11 to 24k$. Therefore, I would go on 
> with G&R, unless you have received something better from other companies.
> If not, I plan to inform G&R that I'm going to ask a re-quote that 
> should comply with INFN requirements.
> I want to speed up the things as much as possible, because time is 
> running and our administrative procedures are slow by definition.
> In the mean time, Dario is fixing some details in the design and 
> changing the dimensions to English standard.
> He is also producing the new drawings, but this will take few days more.
> Best regards,
> Marco
>

-- 
Marc McMullen
Detector Support Group
757-269-7738