[Dsg-rich] Compressor status interlocks

[Tyler Lemon]

Hello Paul, 

In your email with the service report from July 13, 2017, you mentioned that you had spoken to a networking technician regarding how to establish interlocks for the compressors. 

Has there been any replies as to whether we would be able to get the status of the compressor from one of the digital outputs or inputs on the compressors' control screen? 

Best regards, 
Tyler 


From: "Tyler Lemon" <tlemon at jlab.org> 
To: "paul stanko" <paul.stanko at us.atlascopco.com> 
Sent: Monday, July 31, 2017 8:40:09 AM 
Subject: Re: Atlas Copco Service Reports 

Hello Paul, 

Could you give us the contact info for the networking tech? 

Thanks again for your help on Friday. 

Best regards, 
Tyler 


From: "paul stanko" <paul.stanko at us.atlascopco.com> 
To: "Tyler Lemon" <tlemon at jlab.org> 
Sent: Friday, July 28, 2017 6:50:24 PM 
Subject: Atlas Copco Service Reports 



Tyler, 

I just wanted to let you know, I researched the units in our system and was able to get the serial numbers for the elements and documented them in the Commissioning Report. Also to answer your question about how to start/stop the individual element; the programming in the controller does this automatically. The timing can be altered within our programming software, but it is already optimized for safe operation. I spoke with our tech who specializes in networking and he has some ideas how to establish interlocks for the unit in building 90. If you have any questions for me please feel free to contact me directly. 




Best regards, 			


Paul Stanko 
Service Technician 




Atlas Copco Compressors 


Address: 		

Phone: 
Mobile: 	

1-800-258-9898 
(757) 404-3940 


E-mail: 	

paul.stanko at us.atlascopco.com 	

Visit us at: 
Follow us at: 	

http://www.atlascopco.us 
Facebook / Twitter / LinkedIn / YouTube 


Committed to sustainable productivity 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170807/b9abbee3/attachment.html>