[Dsg-rich] Fwd: FW: INFN Stiffening Tool Status

[Marc McMullen]

-------- Forwarded Message --------
Subject: 	FW: INFN Stiffening Tool Status
Date: 	Tue, 8 Aug 2017 14:07:15 -0400
From: 	Ryan Bruce <ryan at gandrmetals.com>
To: 	Marc McMullen <mcmullen at jlab.org>



Marc,

Please see my email below and advise what we can do with this.

Thank You,

**

*Ryan L. Bruce*

Project Manager

*/_G&R Metals_/*

*/a MFS, Inc. Company/*

810 Kiwanis Street

Hampton, VA 23661

Ph: 757.244.5693

Fax: 757.245.1132

*/_Ryan at gandrmetals.com <mailto:Ryan at gandrmetals.com>_/*

*From:*Ryan Bruce [mailto:ryan at gandrmetals.com]
*Sent:* Tuesday, August 8, 2017 10:54 AM
*To:* 'Tyler Lemon'
*Cc:* 'dsg-rich'
*Subject:* RE: INFN Stiffening Tool Status

Tyler,

           We had some issues with fit up due to the lack of dimensions 
on the drawing so it is going to paint today.  I wanted to touch base 
with you to see if we can get some compensation for the extra work we 
had to put in that was of no fault of our own.  Please advise.

Thank You,

**

*Ryan L. Bruce*

Project Manager

*/_G&R Metals_/*

*/a MFS, Inc. Company/*

810 Kiwanis Street

Hampton, VA 23661

Ph: 757.244.5693

Fax: 757.245.1132

*/_Ryan at gandrmetals.com <mailto:Ryan at gandrmetals.com>_/*

*From:*Tyler Lemon [mailto:tlemon at jlab.org]
*Sent:* Tuesday, August 8, 2017 10:44 AM
*To:* Ryan Bruce
*Cc:* dsg-rich
*Subject:* INFN Stiffening Tool Status

Hello Ryan,

What is the status of the INFN stiffening tool?

You mentioned that it would go for its painting no later thank Friday 
August 4. Has it been painted yet and returned to G&R?

Please let us know.

Best regards,

Tyler Lemon

Detector Support Group

------------------------------------------------------------------------

*From: *"Ryan Bruce" <ryan at gandrmetals.com <mailto:ryan at gandrmetals.com>>
*To: *"Marc McMullen" <mcmullen at jlab.org <mailto:mcmullen at jlab.org>>
*Cc: *"dsg-rich" <dsg-rich at jlab.org <mailto:dsg-rich at jlab.org>>
*Sent: *Wednesday, August 2, 2017 10:31:34 AM
*Subject: *Re: [Dsg-rich] INFN Stiffening Tool Status

Marc,

This should go to paint NLT than Friday and it will probably be a week 
from Friday to get it powdered and back to us before we can deliver.

Thank You,

**

*Ryan L. Bruce*

Project Manager

*/_G&R Metals_/*

*/a MFS, Inc. Company/*

810 Kiwanis Street

Hampton, VA 23661

Ph: 757.244.5693

Fax: 757.245.1132

*/_Ryan at gandrmetals.com <mailto:Ryan at gandrmetals.com>_/*

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170809/3b10574a/attachment.html>