[Dsg-rich] Cooling pipe stl files

[dario.orecchini at lnf.infn.it]

Seung Joon & Brian,
Please, can you plan to print the attached stl files?

About the following files I need 1 piece / each:
               Pipe_1.stl
               Pipe_2.stl
               Pipe_3.stl
               Pipe_4.stl
               Pipe plug.stl
               Air Inlet Plug.stl

About the following file I need 4 pieces:
              E_Panel Cables Support.stl

The file, “Cooling Pipeline_Left Side_Assembly.stl”, is the assembly of all the line in stl format, only for give you additional information.

The clearance between the pipe sectors is 0.1mm all around; between the pipe_1 / Pipe plug, and Pipe_4 / Air Inlet Plug is 0.025 all around.

Let me know if it’s necessary to make additional updates.
Thanks for all
Dario


Sent from Mail for Windows 10

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170811/2e3f0182/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Cooling Pipeline_Left Side STL Files.rar
Type: application/rar
Size: 561826 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170811/2e3f0182/attachment-0001.bin>