[Dsg-rich] trolley parts material question

[Marc McMullen]

Hi Dario,

Ryan from GandR has requested that we change two of the parts in the 
Trolley For RICH_Additional Structures drawing set.

1. "Forward Interface Structure" Beam (sheet 3/8)

2.  "Backward Interface Structure" Beam (sheet 6/8)

These part dimensions (6.5 x 6 in inches) are non standard. Ryan suggest 
we use a W6 x 15# with the dimensions 5.99 x 5.99 in inches. The weight 
is 15lbs per foot.

*If you can approve this change, please respond to this email and Ryan 
can use that in the quote as soon as possible*. Those drawings will need 
to be updated. There is additional dimensions for the W6 x 15# beam at 
this website:

http://www.engineeringtoolbox.com/american-wide-flange-steel-beams-d_1319.html

Thanks,

Marc


On 8/15/2017 11:36 AM, Ryan Bruce wrote:
>
> Marc,
>
>           Can we please use a W6 x 15# for this job? The drawing calls 
> out a 6.5 x 6.0 beam which does not exist.  Please advise.
>
> Thank You,
>
> **
>
> *Ryan L. Bruce*
>
> Project Manager
>
> */_G&R Metals_/*
>
> */a MFS, Inc. Company/*
>
> 810 Kiwanis Street
>
> Hampton, VA 23661
>
> Ph: 757.244.5693
>
> Fax: 757.245.1132
>
> */_Ryan at gandrmetals.com <mailto:Ryan at gandrmetals.com>_/*
>

-- 
Marc McMullen
Detector Support Group
757-269-7738

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170815/19f0b31d/attachment.html>