[Dsg-rich] FW: INFN Stiffening Tool Status

[Marc McMullen]

Good Morning Ryan,

Could you please provide some details on the extra work and give us an 
idea of how much this work costs. We can then pass the information to 
the correct people to try to resolve this.

In addition, we have a schedule to keep so an update on the following 
would help keep us on track:

 1. Can you send over the Visual inspection report (welding) for the
    Stiffening Tool.
 2. The current delivery estimate for the Stiffener.
 3. Quote for the drawing I just sent. This one is critical, due to the
    upcoming end of the fiscal year.

Thanks,

Marc


On 8/8/2017 2:07 PM, Ryan Bruce wrote:
>
> Marc,
>
> Please see my email below and advise what we can do with this.
>
> Thank You,
>
> **
>
> *Ryan L. Bruce*
>
> Project Manager
>
> */_G&R Metals_/*
>
> */a MFS, Inc. Company/*
>
> 810 Kiwanis Street
>
> Hampton, VA 23661
>
> Ph: 757.244.5693
>
> Fax: 757.245.1132
>
> */_Ryan at gandrmetals.com <mailto:Ryan at gandrmetals.com>_/*
>
> *From:*Ryan Bruce [mailto:ryan at gandrmetals.com]
> *Sent:* Tuesday, August 8, 2017 10:54 AM
> *To:* 'Tyler Lemon'
> *Cc:* 'dsg-rich'
> *Subject:* RE: INFN Stiffening Tool Status
>
> Tyler,
>
>           We had some issues with fit up due to the lack of dimensions 
> on the drawing so it is going to paint today.  I wanted to touch base 
> with you to see if we can get some compensation for the extra work we 
> had to put in that was of no fault of our own.  Please advise.
>
> Thank You,
>
> **
>
> *Ryan L. Bruce*
>
> Project Manager
>
> */_G&R Metals_/*
>
> */a MFS, Inc. Company/*
>
> 810 Kiwanis Street
>
> Hampton, VA 23661
>
> Ph: 757.244.5693
>
> Fax: 757.245.1132
>
> */_Ryan at gandrmetals.com <mailto:Ryan at gandrmetals.com>_/*
>
> *From:*Tyler Lemon [mailto:tlemon at jlab.org]
> *Sent:* Tuesday, August 8, 2017 10:44 AM
> *To:* Ryan Bruce
> *Cc:* dsg-rich
> *Subject:* INFN Stiffening Tool Status
>
> Hello Ryan,
>
> What is the status of the INFN stiffening tool?
>
> You mentioned that it would go for its painting no later thank Friday 
> August 4. Has it been painted yet and returned to G&R?
>
> Please let us know.
>
> Best regards,
>
> Tyler Lemon
>
> Detector Support Group
>
> ------------------------------------------------------------------------
>
> *From: *"Ryan Bruce" <ryan at gandrmetals.com <mailto:ryan at gandrmetals.com>>
> *To: *"Marc McMullen" <mcmullen at jlab.org <mailto:mcmullen at jlab.org>>
> *Cc: *"dsg-rich" <dsg-rich at jlab.org <mailto:dsg-rich at jlab.org>>
> *Sent: *Wednesday, August 2, 2017 10:31:34 AM
> *Subject: *Re: [Dsg-rich] INFN Stiffening Tool Status
>
> Marc,
>
> This should go to paint NLT than Friday and it will probably be a week 
> from Friday to get it powdered and back to us before we can deliver.
>
> Thank You,
>
> **
>
> *Ryan L. Bruce*
>
> Project Manager
>
> */_G&R Metals_/*
>
> */a MFS, Inc. Company/*
>
> 810 Kiwanis Street
>
> Hampton, VA 23661
>
> Ph: 757.244.5693
>
> Fax: 757.245.1132
>
> */_Ryan at gandrmetals.com <mailto:Ryan at gandrmetals.com>_/*
>

-- 
Marc McMullen
Detector Support Group
757-269-7738

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170809/06dcd585/attachment-0002.html>