[Dsg-rich] trolley parts material question

[Marc McMullen]

Hi Patrizia,

They will not provide the nuts, bolts, washers, threaded rod, or spacers 
which are in the assembly drawings. We will order them separately.

Thanks,

Marc


On 8/15/2017 4:17 PM, Patrizia Rossi wrote:
> Hi Marc,
>
> thanks. The two quotes seems reasonable to me.
> What does it mean in the quote “no hardware included”?
>
> patrizia
> ---------------------------------------------------
> # Patrizia Rossi
> # Jefferson Lab
> # 12000 Jefferson Avenue
> # Suite 5
> # Newport News VA 23606 (USA)
> # e-mail: rossi at jlab.org <mailto:rossi at jlab.org>
> # phone: +1 (757) 269 7740
> # fax: + 1 (757) 269 5800
> # cell: +1 (757) 528 7606
>
>
>
>
>> On 15/ago/2017, at 16:13, Marc McMullen <mcmullen at jlab.org 
>> <mailto:mcmullen at jlab.org>> wrote:
>>
>> Hi Patrizia,
>>
>> GandR Metals has given quotes for the Load test parts ($1840) and the 
>> Strongback parts ($1490). I have attached them to this email. I 
>> believe all he needs is the approval from Dario to change two of the 
>> materials to standard parts and he can finish the third quote for the 
>> Trolley parts.
>>
>> I will start writing the requisitions for purchase as three separate 
>> reqs, and you can inform me on when and in what order to release them.
>>
>>
>> Thanks,
>>
>> Marc
>>
>>
>> On 8/15/2017 11:54 AM, Marc McMullen wrote:
>>>
>>> Hi Dario,
>>>
>>> Ryan from GandR has requested that we change two of the parts in the 
>>> Trolley For RICH_Additional Structures drawing set.
>>>
>>> 1. "Forward Interface Structure" Beam (sheet 3/8)
>>>
>>> 2.  "Backward Interface Structure" Beam (sheet 6/8)
>>>
>>> These part dimensions (6.5 x 6 in inches) are non standard. Ryan 
>>> suggest we use a W6 x 15# with the dimensions 5.99 x 5.99 in inches. 
>>> The weight is 15lbs per foot.
>>>
>>> *If you can approve this change, please respond to this email and 
>>> Ryan can use that in the quote as soon as possible*. Those drawings 
>>> will need to be updated. There is additional dimensions for the W6 x 
>>> 15# beam at this website:
>>>
>>> http://www.engineeringtoolbox.com/american-wide-flange-steel-beams-d_1319.html
>>>
>>> Thanks,
>>>
>>> Marc
>>>
>>>
>>> On 8/15/2017 11:36 AM, Ryan Bruce wrote:
>>>> Marc,
>>>> Can we please use a W6 x 15# for this job? The drawing calls out a 
>>>> 6.5 x 6.0 beam which does not exist.  Please advise.
>>>> Thank You,
>>>> **
>>>> *Ryan L. Bruce*
>>>> Project Manager
>>>> */_G&R Metals_/*
>>>> */a MFS, Inc. Company/*
>>>> 810 Kiwanis Street
>>>> Hampton, VA 23661
>>>> Ph: 757.244.5693
>>>> Fax: 757.245.1132
>>>> */_Ryan at gandrmetals.com <mailto:Ryan at gandrmetals.com>_/*
>>>
>>> -- 
>>> Marc McMullen
>>> Detector Support Group
>>> 757-269-7738
>>>
>>>
>>> _______________________________________________
>>> Dsg-rich mailing list
>>> Dsg-rich at jlab.org
>>> https://mailman.jlab.org/mailman/listinfo/dsg-rich
>>
>> -- 
>> Marc McMullen
>> Detector Support Group
>> 757-269-7738
>> <Load Test - All pdf in One File_quote.pdf><Strongback-RICH 
>> Interfaces Parts - All pdf in One File_quote.pdf>
>

-- 
Marc McMullen
Detector Support Group
757-269-7738

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170815/f785e26a/attachment-0002.html>