[Dsg-rich] Need more Dremel bits for RICH electronic panel

[Marco Contalbrigo]

Hi Sandro, hi Dario,
we identified two incomplete screw holes in the panel, see attached
picture. There are 2 screw holes are missing at the bottom of the
HV connector hole. They are machined only in the front skin,
but not in the back one. How should we complete them ?

Do you have recommended tool or procedures ?

Thanks, Marco.

On Wed, 16 Aug 2017, Tomassini Sandro wrote:

> Guys,
> Please do not cut out too much material because the epanel has to support more than 180lb in the upside down position.
> I would like to see what is happening there.
> Sandro
> 
> Inviato da BlueMail
> Il giorno 16 ago 2017, alle ore 17:08, Tyler Lemon <tlemon at jlab.org> ha scritto:
>       Hello Marc,
> 
> We used up all four of the Dremel bits that you gave us. We still have the last row of cutouts (28 cutouts) on the electronic panel to expand.
> 
> Would you be able to get six more Dremel bits by this afternoon so we will have enough to complete the task this afternoon?
> 
> Best regards,
> Tyler
> 
> 
> 
> _________________________________________________________________________________________________________________________________________________________________
> Dsg-rich mailing list
> Dsg-rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rich
> 
> 
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_20170816_110349.jpg
Type: image/jpeg
Size: 2694736 bytes
Desc: 
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170816/c2b76621/attachment-0002.jpg>