[Dsg-rich] EEL 124 anchor installation

[Marc McMullen]

Thanks Doug


On 2/13/2017 1:44 PM, Douglas Tilles wrote:
> The one the manufacture calls for  ask who ever ordered the drop in's  it should have been on the order for the ancors.
>
> ----- Original Message -----
> From: "Marc McMullen" <mcmullen at jlab.org>
> To: "Doug Tilles" <tilles at jlab.org>
> Cc: "dsg-rich" <dsg-rich at jlab.org>, "Denny Insley" <dinsley at jlab.org>
> Sent: Monday, February 13, 2017 1:39:24 PM
> Subject: Re: EEL 124 anchor installation
>
> Could you specify the bit for us, that way we can get the correct part
> ordered.
>
>
> On 2/13/2017 1:35 PM, Douglas Tilles wrote:
>> No we will need a new one  Please get one ordered   thanks Doug
>>
>> ----- Original Message -----
>> From: "Marc McMullen" <mcmullen at jlab.org>
>> To: "dsg-rich" <dsg-rich at jlab.org>, "Doug Tilles" <tilles at jlab.org>, "Denny Insley" <dinsley at jlab.org>
>> Sent: Monday, February 13, 2017 1:28:57 PM
>> Subject: EEL 124 anchor installation
>>
>> Hi Doug,
>>
>> These are the anchors that were purchased. The required hole dimensions
>> are located here:
>>
>> https://www.fastenam/products/details/2140069
>>
>> Could you let us know if you have the correct bits?
>>
>> Thanks,
>>

-- 
Marc McMullen
Detector Support Group
757-269-7738