[Dsg-rich] JLab compressor factory start-up

[Tyler Lemon]

Hello Frank, 

Both units would be ready for the factory start-up. The two units are in different locations, but will both be connected to power. 

To do the start-up for both compressors, the appointment needs to be pushed back because one compressor will not be ready until the end of next week. Could we push the start-up appointment back to the week of July 24, 2017? 

Best regards, 
Tyler 


From: "Frank Fair" <frank.fair at us.atlascopco.com> 
To: "Tyler Lemon" <tlemon at jlab.org> 
Sent: Tuesday, July 11, 2017 11:01:38 AM 
Subject: RE: JLab compressor factory start-up 



Tyler, 



I passed the information provided to our service schedule. 



Typically we require that all connections be made prior to allotting a time, and I can only provide (1) courtesy start up visit. Would it be possible to have both units ready? 





Best regards, 			


Frank Fair 
Sales Manager 
Industrial Air Division 




Atlas Copco Compressors LLC 


Address: 	

Richmond, VA 23236 	

Phone: 	

804-837-7425 


E-mail: 	

frank.fair at us.atlascopco.com 	

Visit us at: 
Follow us at: 	

http://www.atlascopco.us 
Facebook / Twitter / LinkedIn / YouTube 


Committed to sustainable productivity 





From: Tyler Lemon [mailto:tlemon at jlab.org] 
Sent: Tuesday, July 11, 2017 10:36 AM 
To: Frank Fair <frank.fair at us.atlascopco.com>; dsg-rich <dsg-rich at jlab.org>; Donna Galpin <donna.galpin at us.atlascopco.com> 
Subject: JLab compressor factory start-up 





Hello Frank, 





The serial numbers and information for the compressors we have are below. We will need the factory start-up for Compressor #1. 





We have the wires to power the compressor attached, but the power supply we will be using to power the compressor still needs its ground wire attached to ground. This will be done by the time an Atlas Copco representative will be at JLab. 





Could give us an estimated time and date for the service appointment? 





Compressor # 	

Item 	

Serial Number 	

No. 	

Compressor Info 


1 	

8153602704 	

API771370 	

662151 	

SF 11+ 100 FF LC 200 


2 	

815362704 	

API773171 	

662151 	

SF 11+ 100 FF LC 200 


Best regards, 


Tyler 






From: "Frank Fair" < frank.fair at us.atlascopco.com > 
To: "Tyler Lemon" < tlemon at jlab.org > 
Cc: "dsg-rich" < dsg-rich at jlab.org >, "Donna Galpin" < donna.galpin at us.atlascopco.com > 
Sent: Tuesday, July 11, 2017 8:10:20 AM 
Subject: RE: Question regarding power needed for SF 11+ 100 FF LC 200 compressors 





Tyler, 



I have sent an email to our service scheduler. 



Can you forward the Serial Number of each compressor? 



Also, please confirm that the wires are landed to the compressors. 





Best regards, 			


Frank Fair 
Sales Manager 
Industrial Air Division 




Atlas Copco Compressors LLC 


Address: 	

Richmond, VA 23236 	

Phone: 	

804-837-7425 


E-mail: 	

frank.fair at us.atlascopco.com 	

Visit us at: 
Follow us at: 	

http://www.atlascopco.us 
Facebook / Twitter / LinkedIn / YouTube 


Committed to sustainable productivity 









-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170714/23f39459/attachment-0002.html>