[Dsg-rich] RICH compressors successfully powered

[Patrizia Rossi]

..and thank you to Tyler for following up on that!
---------------------------------------------------
# Patrizia Rossi
# Jefferson Lab 
# 12000 Jefferson Avenue
# Suite 5
# Newport News VA 23606 (USA)
# e-mail: rossi at jlab.org
# phone: +1 (757) 269 7740
# fax: + 1 (757) 269 5800
# cell: +1 (757) 528 7606




> On 28/lug/2017, at 16:56, Tyler Lemon <tlemon at jlab.org> wrote:
> 
> Hello,
> 
> This afternoon we successfully powered on both RICH compressors in the EEL and Hall B.
> 
> For the compressor in the EEL, we turned it on and set a maximum output pressure of 70 psi on the compressor. We then let the compressor run until it turned itself off when reaching an output pressure of 70 psi. After this, we stopped the compressor and vented the attached gas tank. We also got the MAC address for this compressor and Brian has contacted Sergey to get an IP address assigned to the compressor. The compressor's emergency stop button has been pressed, preventing the compressor output from being enabled.
> 
> For the compressor in Hall B, we only turned it on and made sure that it is able to run correctly. We left this compressor powered on, but not running.
> 
> Thank you to DeAnn for making sure all visitors were properly registered to be able to get on site. Thank you to Walt for quickly arranging the short-notice electrical work that needed to be done today. Also, thank you to Paul and Joshua, the Atlas Copco representatives, for helping us get the compressors running.
> 
> Best regards,
> Tyler
> _______________________________________________
> Dsg-rich mailing list
> Dsg-rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rich

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170728/50f4be08/attachment-0002.html>