[Dsg-rich] New pulley for RICH rotation - VB7000

[Tyler Lemon]

Hello Sandro, Dario, Marco Contalbrigo, and Marco Mirazita, 

Attached are four documents regarding the Jaemar VB7000 pulley. This pulley has a high enough load rating to rotate the fully assembled RICH from vertical to horizontal. 

The attached documents are: 
1.) "Pulley VB7000 Support_Plate.pdf" - detailed dimensions of the new anchoring plate that will be needed to attach the new pulley to the assembly structure. 
2.) "VB Series Blocks.pdf" - table of specifications for VB series pulleys. The model for RICH would be VB7000. 

Could you confirm that the VB7000 pulley would be adequate for the rotation of the fully-assembled RICH? 

If it is adequate, DSG can move forward with the pulley procurement process and anchor plate fabrication to make sure the new pulley is installed before it is needed to rotate RICH. 

Please let us know. 

Best regards, 
Tyler 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170626/0fe33180/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Pulley VB7000 Support Plate.pdf
Type: application/pdf
Size: 2149162 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170626/0fe33180/attachment-0002.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: VB Series Blocks.pdf
Type: application/pdf
Size: 309097 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170626/0fe33180/attachment-0003.pdf>