[Dsg-rich] Eyebolts & Others

[Marc McMullen]

Hi Dario,

We still have five 3/4inch swivel hoist rings for the stiffener (which 
only needs 3), I am not sure on the N.2 eyebolts yet.

Doug may be able to comment on that.

George will be reviewing the panel lift drawings, he will need to 
determine what rigging equipment is appropriate.


Thanks

Marc


On 6/29/2017 10:11 AM, Marc McMullen wrote:
> Hi Dario,
>
> I will confirm that we have this equipment at Jlab.
>
> Marc
>
>
> On 6/29/2017 10:08 AM, Dario Orecchini wrote:
>> Hi Marc,
>> Regarding type and size of the eybolts, I confirm, N 3 "Swivel 
>> Eyebolts 3/4" for the "Stiffening and Rotation Tool"
>> I' m sending you the constructive drawings sent to the company that's 
>> working on it.
>>
>> Regarding the support tool dedicated to the insertion of the "Frontal 
>> Panel", we need N.2 Eyebolts not necessarily swivel type.
>> The size could be 7/16" or 1/2".
>> The weight of the heavier panel is 40Kg plus the weight of the 
>> support tool.
>>
>> This morning I sent you by "Wetransfe" the step files of the "Frontal 
>> Panel Insertion System" and of the "E_Panel Support frame"
>>
>> Thanks for all
>>
>> Dario
>>
>
> _______________________________________________
> Dsg-rich mailing list
> Dsg-rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rich