[Dsg-rich] Manual for Elektronikon Graphic controller on Atlas Copco compressor

[Tyler Lemon]

Hello Frank, 

In June 2016, we bought two Atlas Copco compressors (model SF-11+ 100 FF LC 200). We are starting to work the compressors into our controls system to provide air cooling to the RICH detector we are building. 

We found in the manual provided at the time of purchase (attached) detailed instructions for compressor operation from the local Elektronikon Graphic controller screen on the compressor. There are also instructions on how to set up the web server controls for the compressor. 

We cannot find any instructions relating to other types of remote access via the RS485, I/O, or CAN ports on the back of Elektronikon Graphic controller. Is there an additional manual that you can send us with commands or instructions on how to interface with the controller via these ports? Please let us know. 

Best regards, 
Tyler Lemon 
Detector Support Group 
Jefferson Lab 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170328/d0840297/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Atlas Copco manual.pdf
Type: application/pdf
Size: 5218420 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170328/d0840297/attachment-0001.pdf>