[Dsg-rich] RICH electronics assembly

[Marco Mirazita]

Hi Tyler,
as for the mechanic works associated to the electronic tests, the 
procedure for the assembly of the electronic panel support and for the 
installation of the electronic panel in the RICH are on the wiki:
https://clasweb.jlab.org/wiki/index.php/RICH_Assembling
I'm also preparing the procedure for the mechanical assembly of the 
boards on the panel.
Marco



Il 2017-03-08 21:03 Tyler Lemon ha scritto:
> Hello Marco Contalbrigo and Valery,
> 
> In today's DSG meeting, Dario and Sandro informed us that a shipment
> containing the electronic panel assembly support should be expected
> next week (week of 3/13/2017). After its arrival, they mentioned that
> the electronics will be assembled and tested on the electronic panel.
> 
> Has the required safety documentation (OSP, TOSP, BList, or other) for
> the electronic tests been generated?
> 
> I can see on the OSP webpage that there is a signed Laser OSP titled
> "LOSP for RICH PMT test stand" submitted by Valery. Does this cover
> the electronics assembly and testing to be done in EEL 124? If not, we
> would need the information below to be able to write the
> documentation:
> 
> 1.) Detailed procedure for electronics assembly.
> 
> 2.) Cost of electronics and electronics panel.
> 
> 3.) Timeline for assembly of electronics.
> 
> In addition, would the tests require the air cooling system? The RICH
> Air Cooling system is still pending JLab design authority approval and
> could be done in one to two months if needed.
> 
> Please let us know so we can generate the required safety
> documentation (if needed) as soon as possible.
> 
> Best regards,
> 
> Tyler
> 
> _______________________________________________
> Dsg-rich mailing list
> Dsg-rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rich