[Dsg-rich] Eye bolts

[Marc McMullen]

Hi Mike, 

We think we can solve the hoist ring issues, I'm looking for some on site. For the initial quote, please proceed using a standard M24 (x28 or x38) swiveling hoist ring for any sizing you have to consider. Again, INFN will provide hoist rings for any load testing. Additionally, please itemize the quote. 

Regards, 


Marc McMullen 
Physics Division 
Detector Support Group 
7738 


From: "Mike Kreyling" <MikeK at precise-inc.com> 
To: "Dario Orecchini" <dario.orecchini at gmail.com> 
Cc: "Sandro Tomassini" <sandro.tomassini at lnf.infn.it>, "Marc McMullen" <mcmullen at jlab.org> 
Sent: Friday, March 17, 2017 1:53:00 PM 
Subject: RE: Eye bolts 



Dario, 



I will need them for the lift test; will they be available for use when I send it out for lift testing testing? 




From: Dario Orecchini [mailto:dario.orecchini at gmail.com] 
Sent: Friday, March 17, 2017 1:04 PM 
To: Mike Kreyling 
Cc: Sandro Tomassini; Marc McMullen 
Subject: Re: Eye bolts 





Hello Mike 


No, you do not provide them. 





Regards 


Dario 

Inviato da iPhone 



Il giorno 17 mar 2017, alle ore 12:42, Mike Kreyling < MikeK at precise-inc.com > ha scritto: 





Dario, 



I wasn’t sure are we providing the Swivel M24 X 40 Eyebolts? Their pretty expensive and if you already had them I don’t want to buy anymore of them. The ones I found were almost 200$ a piece, so I want to make sure you need them before I budget them in. 



Thank You, 



Michael Kreyling 

Precise Machine & Fabrication Inc. 

3741 Cook Blvd, Chesapeake, Va. 23323 

Phone:757.487.2901 






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170317/7056b830/attachment-0002.html>