[Dsg-rich] Need M5 transfer screw set for exit window work

[Brian Eng]

That's exactly (same vendor and part number) what Marc ordered through our e-commerce system.

Which should be delivered Wednesday morning assuming it doesn't get stuck in signature jail (right now it needs 1 more set).

https://misportal.jlab.org/reqs/pr/viewPrSignatures.do?prNum=370214P

> On May 15, 2017, at 4:12 PM, Bailey, Kevin G. <kevin_bailey at anl.gov> wrote:
> 
> Like this one?
> 
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.mscdirect.com_product_details_82110446&d=DwIFAw&c=lz9TcOasaINaaC3U7FbMev2lsutwpI4--09aP8Lu18s&r=9YtCiIg5kE6YCo5iFAyFiMgzNCONVcBowotEOgGZ4Co&m=tsdVGTNjovPT_wisSLds-hv_Jy6oZt4KfeFSI7YnPVI&s=tdeWMR4gZS75GdbihGGegwFfrDOGWQX5z-perhlufHA&e= 
> 
> Kevin Bailey
> Physics Division
> 9700 S Cass Ave.
> Argonne, IL 60439
> 630-252-4036
> kevin_bailey at anl.gov
> From: Marc McMullen [mcmullen at jlab.org]
> Sent: Monday, May 15, 2017 2:28 PM
> To: Tyler Lemon; dsg-rich; Bailey, Kevin G.; O'Connor, Thomas P.
> Subject: Re: [Dsg-rich] Need M5 transfer screw set for exit window work
> 
> I have order the M5 x 0.8mm version of the kit and requested expedited shipping with PR370214P through ecommerce.
> Marc
> 
> On 5/15/2017 3:02 PM, Tyler Lemon wrote:
>> Hello,
>> 
>> Kevin and Tom have arrived at JLab and have started laying out the aluminum pieces that will attach the exit window to the RICH. 
>> 
>> To mark the aluminum to be able to drill holes, they bought a tool called a transfer screw set. The transfer screws are inserted into the existing threaded holes on RICH, the aluminum placed in the correct position, and tapped with a hammer. This accurately transfers the hole locations to the aluminum for drilling.
>> 
>> While test fitting the aluminum, we found that the existing threaded holes on RICH are sized for M5 screws. The plans for the exit window involved using  M8 sized screws and the transfer screw set sent is for M8 sized threaded holes.
>> 
>> 
>> DSG will search online for a M5 transfer screw set and have it shipped as soon as possible.
>> 
>> As a contingency plan, we have already talked to JLab Machine Shop and they would be able to machine a make-shift transfer screw set out of set screws. This machining would take about one day and cost ~$300. We will arrange the work with Machine Shop first thing in the morning if we are unable to find a set of M5 transfer screws online.
>> 
>> Best regards,
>> Tyler
>> 
>> 
>> _______________________________________________
>> Dsg-rich mailing list
>> 
>> Dsg-rich at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/dsg-rich
> 
> -- 
> Marc McMullen
> Detector Support Group
> 757-269-7738
> 
> _______________________________________________
> Dsg-rich mailing list
> Dsg-rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rich