[Dsg-rich] broken Humidity sensor on left side of RICH to be swapped with spare interlock cable
Tyler Lemon
tlemon at jlab.org
Tue Nov 14 10:03:42 EST 2017
Hello,
This morning, the cable with the broken humidity sensor was replaced with the spare interlock cable with working sensors.
The PCB will still need to be fastened, by epoxy or other, to the detector shell. Marco Mirazita said he will discuss how to best attach the PCB to the detector shell with Sandro.
Best regards,
Tyler
From: "Tyler Lemon" <tlemon at jlab.org>
To: "dsg-rich" <dsg-rich at jlab.org>
Sent: Monday, November 13, 2017 4:40:58 PM
Subject: [Dsg-rich] broken Humidity sensor on left side of RICH to be swapped with spare interlock cable
Hello,
This afternoon, Mindy replaced the humidity sensor on the left side of the RICH that was not working. After connecting to the feedthrough, we were still unable to read the humidity for that sensor. This most likely means there is an issue with the PCB board.
To avoid a delay in planar mirror installation while the board is fixed, I gave Sandro and Marco the spare nitrogen volume interlock cable from Mindy's desk and verified that the temperature sensor and humidity sensor are working on that board.
This evening, they will remove the cable with the broken humidity sensor and install the spare in its place. We will then be able to repair the cable with the broken sensor for use as the spare.
Best regards,
Tyler
_______________________________________________
Dsg-rich mailing list
Dsg-rich at jlab.org
https://mailman.jlab.org/mailman/listinfo/dsg-ric
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20171114/6e0ad956/attachment-0002.html>
More information about the Dsg-rich
mailing list