[Dsg-rich] G&R part for RICH trolley bracket - one hole in incorrect location

[Tyler Lemon]

Hello, 

After receiving the G&R parts yesterday, Dario checked the dimensions and hole placement on all parts and found that one hole on the I-Beam for the RICH trolley brackets is ~1 inch away from its correct location. 

DSG has also verified that the hole is not in the correct location with respect to the drawing. 

A picture of the incorrect hole with its correct location on the I-Beam marked is attached. Also attached is the parts drawing in a pdf with page 6 showing the misplaced hole circled in red. 

Because this part is not needed until RICH is almost ready to go to Hall B, Marc will contact G&R to be able to return this part in order to have a new hole drilled. 

Best regards, 
Tyler 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171011/2a9c56ac/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: RICH trolley I-beam incorrect hole location 2017-10-11.JPG
Type: image/jpeg
Size: 215660 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171011/2a9c56ac/attachment-0001.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Trolley For RICH_All Sheets_082517.pdf
Type: application/pdf
Size: 7321432 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20171011/2a9c56ac/attachment-0001.pdf>