[Dsg-rich] DC trolley and weights for RICH load test to EEL

[Douglas Tilles]

Please have George point out the R2 DC strong back he wants over to the EEL to Mark so he can show Calvin on Wed. Also point out what ever you need over there. The weight blocks will come at the same time with the Dyno 

----- Original Message -----
From: "Marco Mirazita" <Marco.Mirazita at lnf.infn.it>
To: "Tyler Lemon" <tlemon at jlab.org>
Cc: "Bob Miller" <rmiller at jlab.org>, "Doug Tilles" <tilles at jlab.org>, "dsg-rich" <dsg-rich at jlab.org>
Sent: Thursday, October 12, 2017 9:37:11 AM
Subject: Re: [Dsg-rich] DC trolley and weights for RICH load test to EEL

Hello Bob and Doug,
it would be very important if the trolley could be moved in the EEL by 
Friday morning so that Dario can prepare the trolley for the load test 
before he leaves on Saturday.
Thank you,
Marco



Il 2017-10-11 21:08 Tyler Lemon ha scritto:
> Hello Bob and Doug,
> 
> On Thursday October 19, 2017 we are planning to perform the load test
> of RICH's stiffening tool here in the EEL building's high bay area.
> 
> Hall B Engineering has to provide the additional weights (~1400 lb)
> necessary for the load test.
> 
> Hall B Engineering should ensure that both the DC trolley and weights
> are in the EEL no later than Wednesday October 18 so that there will
> be enough time to prepare for the load test the following day.
> 
> Best regards,
> 
> Tyler
> 
> _______________________________________________
> Dsg-rich mailing list
> Dsg-rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rich