[Dsg-rich] Fwd: Re: Update to the Trolley Parts

[Marc McMullen]

Thanks Bob


On 9/12/2017 10:34 AM, Bob Miller wrote:
> Hi Marco,
>
> I have reviewed the drawings and approve them for fabrication.
>
> Regards,
>
> Bob
>
>
> On 9/12/2017 9:58 AM, Marco Mirazita wrote:
>> Dear Bob,
>> did you have a chance to review the latest drawings of the trolley 
>> parts?
>> Dario did just a minimal modification to the position of few holes, 
>> but still we need your approval before starting the construction.
>> Thank you,
>> Marco
>>
>>
>>
>> -------- Messaggio originale --------
>> Oggetto: Re: [Dsg-rich] Update to the Trolley Parts
>> Data: 2017-09-08 15:24
>> Mittente: Marc McMullen <mcmullen at jlab.org>
>> Destinatario: "'dsg-rich'" <dsg-rich at jlab.org>, Bob Miller 
>> <rmiller at jlab.org>
>>
>>
>>
>> Hi Dario,
>>
>> We have looked into the issue with the drawings for the Trolley parts.
>> It looks like the drawings have been corrected however Jlab has sent the
>> shop drawings on multiple occasions.
>>
>> 1. Quote
>>
>> 2. Procurement Quote
>>
>> 3. Final
>>
>> 4. Revised Trolley parts (partial set)
>>
>> The Trolley part set should be combined with the revised Trolley parts
>> and reissued as a set. When the set is done all pages should have the
>> revision section of the title block updated. For instance (Rev. 5), once
>> done Bob can check the drawings and let me know and I will ask GandR to
>> throw out all the old drawings and only used the new revision set.
>>
>> Regards,
>>
>> Marc
>>
>> On 9/7/2017 2:23 PM, Marc McMullen wrote:
>>
>>> Hi Dario,
>>>
>>> GandR just called and requested that you review the Trolley parts
>>> drawings. Sheet 3_8 and 6_8 of the updated drawings have hole spacings
>>> on the I-beam of 2.3 inches but the lateral and central counterplates
>>> on 4_8 and 7_8 were not adjusted. So the drawing has them at 2.5
>>> inches.
>>>
>>> Please review the drawings and communicate changes with Bob Miller.
>>>
>>> Bob,
>>>
>>> After you approve of the changes please let me know and I will
>>> forward the info to the shop and tell them to proceed. Currently, they
>>> are holding on the Trolley parts.
>>>
>>> Regards,
>>>
>>> _______________________________________________
>>> Dsg-rich mailing list
>>> Dsg-rich at jlab.org
>>> https://mailman.jlab.org/mailman/listinfo/dsg-rich [1]
>>
>

-- 
Marc McMullen
Detector Support Group
757-269-7738