[Dsg-rich] RICH hardware interlock system start-up app working, configuration file still needs debugging

[Tyler Lemon]

Hello, 

This morning, we successfully debugged the issues where the Hardware Interlock System program was not able to be deployed as a start-up application to RICHCRIO. Disabling debugging in the start-up app's build and disabling embedded UI via NIMAX allowed the start-up app to be properly deployed again. 

RICHCRIO will now automatically load the interlock program if it is rebooted. 

However, the part of the LabVIEW program that saves user-set interlock limits to a configuration file still needs to be debugged. 

On a reboot, the program tends to load with all sensors disabled and all interlock limits as zero. The program should load with the sensor enable status and limits set for the interlock system before the cRIO was rebooted. 

We will continue debugging the configuration file issues. 

Best regards, 
Tyler 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20170913/a02946cc/attachment.html>