[Dsg-rich] RICH work schedule meeting minutes

[Amrit Yegneswaran]

hello marco, 
thanks for the info. 
we now have an appropriate plug/cord for 230 V/ 50 Hz unit 
but we have looked around and asked around for the dry unit with 12 0 V 60 Hz unit without success. 
as you say, perhaps it has not yet arrived. 
amrit 


From: "Marco Contalbrigo" <mcontalb at fe.infn.it> 
To: "Amrit Yegneswaran" <yeg at jlab.org> 
Cc: "Amanda Hoebel" <amandah at jlab.org>, dsg-rich at jlab.org 
Sent: Thursday, September 21, 2017 5:35:30 PM 
Subject: Re: [Dsg-rich] RICH work schedule meeting minutes 

Dear all, 
the cabinet we sent from Italy has a 220 V, 50 Hz dry unit. 
But we purchased a dry unit that should be compliant with 
the standard 120 V, 60 Hz in the States and can be mounted 
on the cabinet. I am not sure if the latter dry unit has been 
already delivered at JLab, though. 
Best regards, Marco. 

On Wed, 20 Sep 2017, Amrit Yegneswaran wrote: 

> thanks for the meeting minutes amanda. 
> 
> note: 
> the new dry box need 200 V, which is not available in the gowning room where the 
> other dry boxes are stored. 
> two-hundred volt outlets are available in the big and the small clean rooms, however 
> the dry box plug needs to be changed. 
> brian has taken care of this issue. 
> 
> amrit 
> 
> 
> 
> 
> 
> _____________________________________________________________________________________ 
> From: "Amanda Hoebel" <amandah at jlab.org> 
> To: dsg-rich at jlab.org 
> Sent: Wednesday, September 20, 2017 5:06:46 PM 
> Subject: [Dsg-rich] RICH work schedule meeting minutes 
> 
> Hello, 
> 
> Attached are minutes from this morning's meeting regarding the RICH work schedule. 
> 
> Regards, 
> Amanda 
> _______________________________________________ 
> Dsg-rich mailing list 
> Dsg-rich at jlab.org 
> https://mailman.jlab.org/mailman/listinfo/dsg-rich 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170921/229f42f8/attachment-0002.html>