[Dsg-rich] Fwd: You Requested Information for the Coated Stainless Steel Tubing

[Marc McMullen]

Hi Matt and Dario,

I called McMaster-Carr and their PVC jacketed tube is not ASTM rated. 
The link below is to a spec sheet for a Swagelok jacketed tubing, which 
has the rating (ASTM A269, A213). The overall OD is larger 0.6", but the 
wall thickness for the part recommended for gas service is 0.049".

https://www.swagelok.com/downloads/webcatalogs/en/MS-02-188.pdf

Thanks

Marc


On 9/28/2017 8:35 AM, Matthew Marchlik wrote:
> Marc,
>
> Could you please ask them what the ASTM spec is for the tubing itself?
>
> Matt
>
> ----- Original Message -----
> From: "Marc McMullen" <mcmullen at jlab.org>
> To: "dsg-rich" <dsg-rich at jlab.org>
> Sent: Wednesday, September 27, 2017 8:28:42 PM
> Subject: [Dsg-rich] Fwd: You Requested Information for the Coated Stainless Steel Tubing
>
> Hi Dario,
>
> Here is the dimensions of the tube, the overall OD is 0.564"
>
> Marc McMullen
> Physics Division
> Detector Support Group
> 7738
>
>
> From: "McMaster-Carr" <dnj.sales at mcmaster.com>
> To: "Marc McMullen" <mcmullen at jlab.org>
> Sent: Wednesday, September 27, 2017 4:24:48 PM
> Subject: You Requested Information for the Coated Stainless Steel Tubing
>
>
>
> Hi Mark,
>
>
>
> The coated stainless steel tubing you called about ( 3331K13 ) has a total overall OD of 0.564" when factoring in the plastic coating.
>
>
>
> I've attached a data sheet which details this as well.
>
>
>
> Joe
>
> _______________________________________________
> Dsg-rich mailing list
> Dsg-rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rich

-- 
Marc McMullen
Detector Support Group
757-269-7738