[Dsg-rich] RICH EP cRIO - found broken sensor wire, wire will be repaired.

[Tyler Lemon]

Hello Marco, 

Amanda, Pablo, and I re-routed the "cable 6" along the same path as the other cables. 

We also installed the EP cRIO in the same rack. 

After lunch, we will verify all of the sensors are wired correctly and route the EP interlock cables. 

Best regards, 
Tyler 


From: "Marco Contalbrigo" <mcontalb at fe.infn.it> 
To: "Tyler Lemon" <tlemon at jlab.org> 
Cc: "dsg-rich" <dsg-rich at jlab.org> 
Sent: Monday, January 8, 2018 9:27:56 AM 
Subject: Re: [Dsg-rich] RICH EP cRIO - found broken sensor wire, wire will be repaired. 

Hi Tyler, 
thanks for the info. The first cable we routed in the Hall 
(cable 6) has a wrong path in the rack. Easier fix can 
be done by temporarely unplug the cable on the cRiO side. 
Regards, Marco. 

On Mon, 8 Jan 2018, Tyler Lemon wrote: 

> Hello, 
> 
> We are preparing the cRIO for RICH's electronic panel interlock sensors to move it 
> to Hall B. 
> 
> While collecting and bundling all interlock cables, we found one sensor's wire was 
> smashed some time in the past. This wire seems to be for either EP humidity sensor 
> #13 or #14. Looking at archived humidity data, EP Humidity #13 was incorrectly 
> reading ~70% for a few days before RICH moved to Hall B. The smashed wire could be 
> the reason for the bad reading. 
> 
> Before moving the cables and cRIO to Hall B, Mindy will repair the cable. 
> 
> Best regards, 
> Tyler 
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20180108/7d2e31fd/attachment-0002.html>