[Dsg-rich] Update hardware interlock program to include differential pressure transducers?

[Matteo Turisini]

Tyler,

I am not using/monitoring the RICH today. You can keep LV off as long as you need it.

Thanks,

Matteo

> Il giorno 13 mar 2018, alle ore 14:42, Tyler Lemon <tlemon at jlab.org> ha scritto:
> 
> Hi Matteo,
> 
> We will make sure the cRIO is back online this afternoon so the system is ready for your electronic tests.
> 
> Since LV is still on, should we still use the override switch or can LV be disabled by a cRIO reboot?
> 
> Best regards,
> Tyler
> 
> From: "Matteo Turisini" <matt at jlab.org>
> To: "Tyler Lemon" <tlemon at jlab.org>
> Cc: "dsg-rich" <dsg-rich at jlab.org>
> Sent: Tuesday, March 13, 2018 9:37:37 AM
> Subject: Re: [Dsg-rich] Update hardware interlock program to include differential pressure transducers?
> 
> Hi Tyler,
> 
> you can go ahead, please let me know when you’re done, tomorrow morning Italian time I would continue the electronics testing.
> 
> Thanks,
> 
> Matteo
> 
> Il giorno 13 mar 2018, alle ore 13:42, Tyler Lemon <tlemon at jlab.org> ha scritto:
> 
> Hello,
> 
> To add the differential pressure transducers to RICH's hardware interlock LabVIEW program, RICH's N2 cRIO will need to be taken offline.
> 
> Marco Mirazita requested yesterday to coordinate to ensure the cRIO being taken offline does not affect any electronics testing.
> 
> Are there any tests today for RICH where the N2 cRIO should not be taken offline?
> 
> If there are ongoing tests, we can use the override switch again to prevent power to RICH from being disabled.
> 
> Best regards,
> Tyler
> _______________________________________________
> Dsg-rich mailing list
> Dsg-rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rich
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20180313/0d27b7c6/attachment-0002.html>