[Dsg-rich] RICH Calibration Runs

[Benjamin Raydo]

Hi Matteo,

I don't think that conflicts with anyone (DAQ has been pretty mostly idle or tests/cosmics that don't include RICH).

Thanks for the notice and good luck!

Ben

----- Original Message -----
From: "Matteo Turisini" <matteo.turisini at gmail.com>
To: "Aram Movsisyan" <maram at mail.desy.de>, "Marco Contalbrigo" <mcontalb at fe.infn.it>, "Mirazita Marco" <marco.mirazita at lnf.infn.it>, "Valery Kubarovsky" <vpk at jlab.org>, "Serguei Boiarinov" <boiarino at jlab.org>, "Benjamin Raydo" <braydo at jlab.org>, "dsg-rich" <dsg-rich at jlab.org>
Sent: Tuesday, March 13, 2018 1:05:32 PM
Subject: RICH Calibration Runs

Hi All,

tomorrow March 14th I'd like to work on the RICH stand-alone software tools
with two main goals:
1) increase the TDC daq rate by using the DMA transfer protocol,
2) implement reconstruction of hits and events (for crosstalk suppression,
time walk estimation  and multiplicity studies).
Together these two steps will allow the finalisation of the LED setup that
is, among other things, a way to extract the time calibration parameters
alternative to the use of CLAS12 data.

I plan to make tests in the morning Italian time and take some LED runs
later.
If Aram is available he could continue the test in the afternoon (jab time).

Please let me know in case of conflicts with your schedule.
Also comments and suggestions are welcome.
In case somebody wants to use CODA I would ask Sergey to temporarily remove
the RICH from the CODA environment.

Thanks,

Matteo