[Dsg-rich] Compressor Air quality

[Vincenzo Lucherini]

If after many months of operation there is any condensation water in the 
tank, this testifies to the the superb functioning of the compressor and 
the quality of the air it releases.
V.

Il 2018-05-11 21:28 Brian Eng ha scritto:
> Marc and I tried to remove the bottom plug on the tank, but it has
> some sort of sealant (epoxy?) on it and we couldn't remove it with
> hand tools.
> 
> We removed one of the smaller side ones near the bottom and at least
> visually there is no condensation in the tank.
> 
> The plug was reinstalled with teflon tape; we'll need to leak check it
> once the compressors are turned on again.
> 
> FYI the moisture sensor was reading high 1600s PPM on it's local
> display before and after we removed the plug.
> 
>> On May 11, 2018, at 1:20 PM, Amrit Yegneswaran <yeg at jlab.org> wrote:
>> 
>> george,
>> we should do both.
>> check for condensation as vicenzo suggests, and hook up the 
>> instrumentation.
>> amrit
>> From: "George Jacobs" <jacobsg at jlab.org>
>> To: "Vincenzo Lucherini" <Vincenzo.Lucherini at lnf.infn.it>, "Tyler 
>> Lemon" <tlemon at jlab.org>
>> Cc: "dsg-rich" <dsg-rich at jlab.org>, "Mirazita Marco" 
>> <Marco.Mirazita at lnf.infn.it>
>> Sent: Friday, May 11, 2018 1:02:02 PM
>> Subject: Re: [Dsg-rich] Compressor Air quality
>> 
>> Why not just properly connect up the ppm H2O sensor that was installed 
>> in the tank last year?
>> 
>> On 5/11/2018 9:35 AM, Vincenzo Lucherini wrote:
>> Hi,
>> 
>> now that the AIR Compressor is OFF, after several months of continuous 
>> operation, it would be worth to check (if not already done) for any 
>> presence of water (from condensation) in the bottom of the tank. This 
>> information could be useful to better understand the quality (dryness) 
>> of the air coming out from the Compressor.
>> 
>> V.
> 
> _______________________________________________
> Dsg-rich mailing list
> Dsg-rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rich