[Dsg-rich] archival of RICH HV info?

[Tyler Lemon]

Hello Valery, 

I went ahead and made a request this morning to get the HV and LV info added to the Mya Archiver. 

The request will add V-set, I-set, V-monitored, and I-monitored to the archiver in the HB_RICH group. 

Deadbands were set at 1 for the PVs relating to HV and 0.01 for those relating to LV. These can be changed at any time; we just wanted to get the request in as soon as possible. 

Best regards, 
Tyler 

From: "Valery Kubarovsky" <vpk at jlab.org> 
To: "Tyler Lemon" <tlemon at jlab.org> 
Sent: Monday, September 24, 2018 5:47:28 PM 
Subject: Re: [Dsg-rich] archival of RICH HV info? 

Hello Tyler, 

We still don't have archive of the RICH HV and LV. We will implement it soon. 
At the same time you can try to use RICH scalers. When HV=0 the rate is zero as well. Unfortunately the scalers don't work al the time. 

Regards, 
Valery 





From: "Tyler Lemon" <tlemon at jlab.org> 
To: "dsg-rich" <dsg-rich at jlab.org> 
Sent: Monday, September 24, 2018 11:43:06 AM 
Subject: [Dsg-rich] archival of RICH HV info? 




BQ_BEGIN

Hello Valery, 

We were looking at RICH interlock sensor values today and trying to compare values when HV was off and when HV is on. 

We could not find any archived information on MyaPlot in the HB_RICH group for HV's voltage or current monitoring. 

Would the HV information be stored under some different PV or PV group? 

Please let us know. 

Best regards, 
Tyler 



_______________________________________________ 
Dsg-rich mailing list 
Dsg-rich at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-rich 
BQ_END


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20180925/96d83453/attachment-0002.html>